Simple User Manual Guide For Linksys WiFi Extender RE6300 Setup

Do you want to amplify the existing wireless signals to a long extent? Facing issues in the wireless network connectivity in dead spots? Getting a reliable WiFi range to every corner of the home is a little bit challenging but with Linksys WiFi Extender re6300 Setup, you can do it easily. It is the easiest way to improve the existing wireless network. With this device, you can extend the home WiFi and can do online streaming continuously, play online games, watch HD videos and many more. In this article, you will learn the simple way of the Linksys WiFi Extender RE6300 Setup. With this, you can boost the WiFi signals without making any change in the wireless router settings.

Steps for Linksys WiFi Extender RE6300 Setup Manually

For the Linksys wireless extender setup, you are required to connect your device over a wired or wireless connection. Go through the below instructions for the Linksys WiFi Extender RE6300 Setup using the manual method:

Step 1: The first step is to plug in your extender into the electrical socket. Turn on your Linksys WiFi re6300 extender.

Step 2: After that, connect your Linksys re6300 extender to the home WiFi router using an Ethernet cable.

Step 3: Turn on your computer or laptop and connect your system to the reliable wireless network. 

Step 4: Launch any internet browser of your preference from your system. 

Step 5: Enter extender.linksys.com in the URL bar of the internet browser.

Step 6: Thereafter, the Linksys re6300 extender page displays on the screen.

Step 7: Now, you need to enter the default username and password in the respective fields. 

Step 8: Once you enter the login credential details, tap on the Login button.

Step 9: A new screen displays on the screen showing instructions for the Linksys re6300 extender setup. 

Step 10: Follow the instructions displayed on the screen. 

Linksys WiFi Extender RE6300 Setup Using WPS Method

WiFi Protected Setup is the simplest way used for the Linksys WiFi Extender RE6300 Setup. Here are the steps for the Linksys extender setup using the WPS method:

Step 1: Firstly, plug in your extender into the power socket and turn it on.

Step 2: After that, press the WPS button on your wireless router.

Step 3: Within 2 minute, press the WPS button on your wireless range extender.

Step 4: Now, you have to wait for some time until the power LED light turns to solid green.

Step 5: Next, unplug the Linksys WiFi range extender from the power socket. Thereafter, place it anywhere where you want to extend the wireless network signals. 

Troubleshoot Linksys WiFi Extender RE6300 is Not Working 

There may be a possibility that your Linksys WiFi Extender RE6300 stops working. In this section, we have shared the steps that helps you in troubleshooting the issue:

Step 1: Make sure that you have established all the cable connections properly between router and extender. 

Step 2: Ensure that the Ethernet cable is plugged in properly from extender to router.

Step 3: Check the Ethernet cable that you have used for establishing the connection. It should not be broken or damaged. 

Step 4: If all the connections are correct then reboot the extender and computer.

Step 5: Ensure that the default gateway that you have entered in the address bar of the web browser is correct.

Step 6: Try to use the IP Address 192.168.1.1 to access the Linksys re6300 extender page. 

Step 7: Update the extender firmware to the latest available version. 

Step 8: If none of the above methods works for you then reset your device to the factory default settings. 

Congrats! After following the above-mentioned guidelines, you can easily complete the Linksys WiFi Extender re6300 Setup on your device whatever you are using. Once you are done with the setup process, you can easily resolve the poor connectivity and various network related issues.