How Do I Connect TP-Link WiFi Extender Setup?

Are you fed up from the WiDi dead zones? Want to boost the WiFi signals to the long distance? Well, don’t worry! By installing the TP-Link WiFi extender, you will get reliable WiFi coverage throughout your home or office. It will help you in boosting the signal strength to a long extent and works efficiently with the standard wireless router. Once you configured your TP-Link extender, you can place it at any place of your preference without any further settings. The WiFi signal light will guide in searching the perfect location. With TP-Link WiFi range extender, you can easily access and manage the extender through smart devices. Here, in this blog, you will get to know “How to complete TP-Link WiFi extender setup”. Scroll down and check out the steps. 

Instructions for TP-Link WiFi Extender Setup

There are different methods through which you can complete the TP-Link WiFi extender setup on your device such as manually, using WPS method etc. 

TP-Link WiFi Extender Setup Manually

Whenever you purchase a new TP-Link extender then you will get a manual with it with which you can easily set up your extender device. The process of setting up the TP-Link WiFi extender is quite simple. Follow the below instructions step-by-step for the TP-Link WiFi range extender setup on your device manually:

Step 1: The first step is to turn on your modem, router and computer before establishing a connection.

Step 2: After that, connect the modem to the WAN port of your router using the Ethernet cable. 

Step 3: Next, take an Ethernet cable and connect your computer to the LAN port of the router. 

Step 4: You need to switch on your modem and router. After waiting for some time, also turn on your modem.

Step 5: Thereafter, log in to the web access page of your router device.

Step 6: In the next step, you need to configure the WAN connection. 

Step 7: Now, enter the username and password in the respective field. 

Step 8: At last, you need to verify the WAN tab in the Status page to find whether the connection has been established or not. 

TP-Link WiFi Extender Setup via WPS Button

Go through the below steps for TP-Link WiFi extender setup through WPS Button:

Step 1: Firstly, connect the power adapter of the TP-Link WiFi extender to the electrical outlet.

Step 2: After that, switch on your range extender and wait for some time until the power light becomes solid and stable. 

Step 3: Make sure that your host network features the WPS button.

Step 4: Thereafter, press the WPS button given on the back side of the main router to connect your extender to the router.

Step 5: Now, wait for some time until the WPS LED light starts blinking or becomes solid. If the LED light does not start blinking then press the WPS button once again. 

Step 6: Next, you need to press the WPS button on your TP-Link WiFi range extender within the two minutes. 

Step 7: Wait for some time until the LED light on your device turns to blue. The blinking of blue light indicates that you have established the connection successfully.

Step 8: In case you are using the dual-band router then you have to repeat all the above steps in order to connect the other band to the TP-link range extender.

Step 9: If you are facing trouble in connecting the TP-Link range extender then make sure that your both networks are sharing the same network names. 

With the above-mentioned instructions, you can easily complete the TP-Link WiFi Extender Setup on your device without any trouble. 

How Do I Perform TP Link Extender Reset?

TP-Link WiFi range extenders are known as one of the amazing devices that helps in boosting the weak WiFi signals and resolve the low wireless signal issues in your home or office.To use the ultimate features of the extender, you firstly need to set up the TP-Link WiFi extender from your computer or laptop whatever you are using. But sometimes, when the user faces issues with WiFi signals and disconnecting the internet continuously then resetting the TP-Link extender will help you in resolving the WiFi related issues. In this blog, you will get to know how to carry out the tp link extender reset to make your extender workable again.

Instructions to Reset TP-Link Extender from Software 

Go through the below mentioned instructions to reset the TP-Link extender to the factory default settings from software and make it workable again:

Step 1: The first step is to plug-in your TP-Link range extender to the electrical socket. Also, connect your device to the WiFi connection.

Step 2: After that, you need to login to the TP-Link extender by using the IP address that you have configured. During the first-time setup of your extender. You can also use the default IP address 192.168.0.254 to login to your extender. 

Step 3: Thereafter, go to the settings and then tap on the system tools option. 

Step 4: Next, tap on the backup and restore option from the left pane of the menu.

Step 5: In the next step, you need to select the factory restore option to carry out the factory reset option for the TP-Link range extender. 

Step 6: Now, you will see that a pop-up message will display on the screen saying, “do you really want to perform the factory default settings”? Hit on the yes button for the confirmation. 

Step 7: Now, your TP-link extender will start rebooting with the factory default settings. Set a new name for your wireless network.

Step 8: One thing that you need to remember is to check the WiFi signal in order to confirm that the TP-Link WiFi extender is reset to the factory default setting or not. 

Hopefully, with the above-mentioned instructions, you are able to perform the soft reset on your TP-Link wireless range extender successfully. Once you reset your range extender, you are required to set up your TP-Link extender again to boost and extend the WiFi signals. 

Instructions for Hard Reset TP-Link Extender 

The hard reset is mainly performed when you forget the login credential details for the TP-Link extender setup process. It includes username, password, and IP address. If you want to perform the hard reset on your extender then you need to place your extender nearer to the router. Below are the steps:

Step 1: The first step is to plug in the range extender into the electrical outlet and then wait for some time so that it will turn on completely.

Step 2: After that, find a reset button on your device. You will find it at the backside of the extender. 

Step 3: Take a paper clip or needle or any sharp object to press the reset button on your device. 

Step 4: Release the button after 5-6 seconds until you see that your extender will start rebooting.

Step 5: At last, ensure that your wireless signal shows the default SSID name. 

We hope that these instructions will help you in the TP Link Extender Reset and make your device workable again so that you can enjoy the high-speed WiFi connection on your WiFi enabled device at any place in your home or office. 

Common WiFi Extender Issues with Relevant Solutions

Struggling with the WiFi extender not working issues? Want to know the reasons behind extender not working issues? Are you looking for the appropriate solutions to fix the issues associated with your WiFi extender? Well, Netgear range extender is the ultimate solution for all the internet related issues such as connectivity and speed. Most of the users feel inconvenience when the WiFi extender is not working as due to this they are not able to access the internet connection. In this blog, we have shared the step-by-step instructions to fix this issue. Once you carry out these steps, you will be able to use the internet connection again on your device without any hassle. Let’s move towards the troubleshooting tips. 

Best Troubleshooting Tricks for WiFi Extender not Working Issue 

Go through the below-mentioned troubleshooting tricks to fix WiFi extender not working issue:

Step 1: The first step is to check whether your wireless router is working fine or not. It is important because when the router is not working then WiFi extender also shows an error. 

Step 2: Make sure that you have established all the connections properly. Check the Ethernet cables that you are using for establishing connection. It should not be broken or damaged. 

Step 3: Ensure to carry out the Netgear extender setup process very carefully and complete as inaccurate and incomplete setup may create issues.

Step 4: Low or poor speed internet connection affects the performance of the Netgear WiFi range extender and you may get a WiFi extender not working. To resolve this issue, try to reboot the extender. For this, you need to switch off the extender for some time and turn it on again. 

Step 5: If none of the methods work to troubleshoot the issue then reset the Netgear WiFi range extender to the factory default settings. 

Step 6: Place your WiFi range extender nearer to the wireless router. 

Step 7: Make sure to place your wireless router and the WiFi extender from the interference creating objects such as bluetooth speakers, microwave, cordless phones and many more. 

Step 8: You need to check the LED lights on the WiFi range extender and router. It should be active and stable. If the red LED light is flashing on the extender device then it means that your extender is not connected properly. Check the connections properly.

Step 9: Make sure that you are using the updated web browser from your device for accessing the WiFi extender setup web page.

Step 10: Try to use some other web browser to access the WiFi range extender setup page. 

Step 11: Make sure that there should not be any loose connections. 

Step 12: Reboot all the wireless network devices such as extender, router and computer.

Troubleshoot WiFi Extender issue successfully!

We hope that the above-mentioned instructions will help you in troubleshooting the WiFi Extender Not Working issue and make your extender work again. Once you resolve the WiFi extender issue, you can enjoy the high-speed internet connection on your device. Although, if you have any doubt or having any issue with your WiFi range extender then you can contact our experienced and professional support team to guide you to fix the issue.