TP Link WiFi Extender Setup Using Wireless Connectivity

The TP Link is the brand which everyone knows from so long. Therefore, the trust on the TP-Link brand makes the TP Link WiFi extenders as the trustworthy product. This is the reason most of the users like to buy the TP Link extenders for the extension of the network. To do so, there is a need to complete the TP Link WiFi Extender Setup. But, what to do if you do not have the ethernet cable with them. In that case, they can complete the TP Link WiFi Extender Setup using the wireless connectivity. There are two methods available for the extender setup using the wireless connectivity- Wireless manual method and the WPS method. In this blog, you will get to know about the steps to complete the setup using both the wireless methods. So, check out the steps below, and complete the setup to get connected with the extended network.

TP Link WiFi Extender Setup Using Wireless Manual Method

The wireless manual method, you will complete the setup with the help of the browser without using the ethernet cable. Therefore, the steps to complete the TP Link WiFi Extender Setup using the wireless manual method are defined below:

Step 1: First, take the TP Link extender, and connect it to the power source.

Step 2: Try to connect the TP Link repeater in the same room as that of the router to avoid any interference.

Step 3: Now, turn on your TP-Link extender and wait for it to get started completely.

Step 4: After that, turn on the system in which you want to complete the setup.

Step 5: Disconnect your system dfrm any other network, and search for the available networks.

Step 6: Then, select the name of your TP Link extender’s network, and connect to it.

Step 7: In case, it asks for the password, then enter default password mentioned on yoru extender.

Step 8: After that, launch the web browser like Google Chrome in your system.

Step 9: Use the IP address 192.168.1.1 in the address bar, and press the Enter key.

Step 10: Then, the login screen will open up for the TP-Link repeater.

Step 11: Use the default credentials mentioned over the TP-Link extender in order to complete the login.

Step 12: Click on the Login button.

Step 13: After that, you will land on the admin panel for the TP Link repeater.

Step 14: Then, the list will open for the networks available in your range.

Step 15: Select the name of your main home network.

Step 16: Further, it will ask for the password. So, enter the current password for your main WiFi network.

Step 17: Click on the Connect button to extend your network.

Step 18: Change the other settings as well if required, and save all the changes.

Step 19: Then, disconnect your TP Link extender from the current location.

Step 20: Connect it somewhere near to the weak zone so that the network could get extended in a real manner.

Step 21: Connect your device with the extended network, and get the full-range for the network.

In this way, you can easily complete the setup for your TP Link extender using the Wireless manual method. There is another option available as well of the WPS. For that, you need to follow the next section.

TP Link WiFi Extender Setup Using WPS Method

The WPS method is the easiest method for the competition of the setup. But, the only thing that is required is that your router must support the WPS feature. If it so, then you need to go with the following steps:

Step 1: First, take the TP Link extender, and connect it to the power source.

Step 2: Try to connect the TP Link repeater in the same room as that of the router to avoid any interference.

Step 3: Now, turn on your TP-Link extender and wait for it to get started completely.

Step 4: Then, first press the WPS button on the router, and wait for the WPS/ WiFi light to blink.

Step 5: After that, in 1-2 minutes, you need to press the WPS button on the extender as well.

Step 6: Keep it pressed till it also doesn't start blinking.

Step 7: Then, release them and wait for both the lights to get stable.

Step 8: When both the lights get stable, then it means, your network gets connected.

Step 9: If the LED goes off then it emans connection failed, and you need to start it again.

Step 10: If connected successfully, then connect your extender somewhere near to the weak zone.

Step 11: Connect your device with the extended network, and get the full-range for the network.

So, these are the two ways to complete the TP Link WiFi Extender Setup using the wireless connectivity.

No More Ethernet Cable Required!

Wrapping up! Though the ethernet cable provides the security, there is an uninterrupted network. But, not everyone used to have the ethernet cable for the setup. In that case, there is a need to complete the TP Link WiFi Extender Setup using the wireless connectivity. In this blog, you get to know about the two methods for completing the  TP Link WiFi Extender Setup. The steps for both the methods are explained in detail so that you don’t face any confusion. In case, you are getting confused with the steps or got stuck in between. Then, you can take the help of our experts. They will help you in knowing the best solution and will guide you through the whole setup procedure. Therefore, you would be able to complete the  TP Link WiFi Extender Setup in no time. After this, you can easily say, there is no need for the ethernet cable. You can get connected to the extended network with full range using the wireless connectivity.

Troubleshooting Setek WiFi Range Extender not Connecting to Internet

Is your Setek WiFi range extender not connecting to the Internet connection even after setting it properly? Keep losing the internet connection continuously? Feeling frustrated with the use of the Setek WiFi range extender? If so, then don’t panic! You have landed at the right spot. We are here to help you. Here, in this blog, we will describe the reasons due to which you are unable to connect with the internet connection and the best solutions that resolve the problem permanently. Keep reading the blog till the end to know the solutions. Let’s check it out. 

Actual Reasons Behind Setek WiFi Range Extender Not Connecting to Internet

In case, you are trying to connect your Setek WiFi range extender with the internet connection and an error message displayed on the screen due to which you are unable to access the internet then there may be the below reasons behind the occurrence of the issue:

• Setek WiFi range extender is not configured properly to use
• Use of outdated or corrupted firmware for your Setek WiFi range extender
• The Setek extender is showing the orange LED light
• Weak or no connection status of the network adapter
• Have not completed the Setek extender setup properly
• Place the Setek extended in dead zone
• Facing obstacles or interferences in getting the signal from your extender
• Establish loose cable connections
• Use of faulty or corrupted software or hardware of Setek WiFi range extender

Once you know the reason due to which you are unable to connect the Setek range extender to the internet, you can easily troubleshoot the issue by following the tips given in the next section.

Best Troubleshoot Tips to Fix Setek WiFi Range Extender not Connecting to Internet

Go through the below-mentioned troubleshooting tips to fix the issue that Setek WiFi range extender is not connected to the internet even after setup. Here are the steps to resolve the issue:

Step 1: Make sure to place your Setek WiFi range extender away from any type of interference creating devices including Bluetooth speakers, microwave, cordless phones, glasses, fish tanks, mirrors, metal objects, fish tanks and many others.

Step 2: Check the power LED lights on your Setek WiFi range extender and router. In case, the power LED light shows red in color then it means that your extender is not connected to the router device.

Step 3: If the orange LED light is blinking on the Setek WiFi range extender then it means that the extender is connected to the router but there is no WAN or internet.

Step 4: Try to reset the Setek WiFi range extender to the factory default settings.

Step 5: Check all the established connections made by you. There should not be any loose connection as it may create the issue. 

Step 6: Reboot your modem, router, computer, laptop and extender and check whether the issue gets resolved or not. 

Step 7: Try to set up the Setek WiFi range extender by sign some other web browser.

Step 8: Make sure that the firmware that you are using for the Setek WiFi range extender is updated to the latest available version or not. 

Congrats! With the above-mentioned steps, you can easily troubleshoot the Setek WiFi Range Extender Not Connecting to the internet connection even after setup issue without any hassle. All the steps are simple and easy to carry out. However, if you have any query and even get the same issue after following the above steps then you can contact our professional expert team by dialing our helpline number. You can also do the live chat with our experts at any time to get the best possible solution to your problem to fix the issue. Feel free to call us at any time. 

WiFi Extender Not Connecting To Internet- What To Do?

WiFi extenders have made life very easy. Now, there is no need to buy the new WiFi repeaters or a new internet connection. Just have a WiFi extender, complete the setup, and you are using the same network all over your home. Now, you must have an idea that to use the WiFi extender, it needs to be connected to the internet. But, what to do when the WiFi extender not connecting to internet? Therefore, you need to resolve this using the simple steps mentioned in this blog. Once your extender is connected to the internet, then you can access the internet anywhere at your home. So, let’s get started!

Steps To Resolve WiFi Extender Not Connecting To Internet Issue

There can be various reasons because of which the WiFi extender is not connecting to the internet. Those can vary from the simple to the complex one. Well, in this section, you are going to know about the different steps which will cover everything from the simple to the complex one. So, just keep applying the following steps one by one till your problem is not resolved:

Step 1: Make sure you have connected the WiFi extender to the power plug using the power adapter given along with it.

Step 2: Also, ensure that you have placed the WiFi extender in the main WiFi’s range.

Step 3: then, check you have connected your device with the extender’s network during the setup procedure.

Step 4: If you have completed all the above steps, and still there is an issue, then open the web browser.

Step 5: Type the link in the URL field as www.mywifiext.net.

Step 6: Then, complete the login using the current admin login credentials for the WiFi extender.

Step 7: In case, you have not changed any credentials, then there is a need to use the default credentials.

Step 8: Sometimes, due to the outdated firmware, the issue used to occur. Step 9: Most of the time, the dashboard of the router used to show the Firmware Update Available message.

Step 10: In that case, click over that to download the firmware update.

Step 11: Otherwise, go to the Firmware section.

Step 12: Under that, select the option of the Device update.

Step 13: Next, click on the Check button to search for any new firmware update if available.

Step 14: If it shows any new update, and proceed to download it as per on-screen instructions.

Step 15: After the firmware update, whether the WiFi extender starts working or not, you need to reset your WiFi extender. For this:

• Locate the Reset button on your extender.
• Then, take a pin-point object or some needle and press the reset button for around 20-30 seconds.
• Keep it pressed till all the LEDs light goes off.
• After this, release and wait for the extender to get started.
• Once, the extender is resetted, then complete the setup of yoru extender again as everything comes back to default. 

Step 16: Make sure you have not put any device’s MAC address in the blocking list in the settings of the extender.

Step 17: At last, if earlier trying to complete the setup with the wireless connection, then try wired connection for setup.

So, these are the methods to resolve the issue of WiFi extenders not connecting to the internet. These are very simple steps which would help you to connect your WiFi extender again to the internet. Therefore, now you would be able to access the internet anywhere at your home.

Extender Is Connected!

Summing up! Now it is clear that without the internet connection, the WiFi extender won’t be able to work. Therefore, it is very important to resolve the WiFi Extender Not Connecting To Internet issue. Therefore, this blog is solely for you which has explained all the steps that will help you to resolve this problem. In case, these steps have not helped you, then there is the internal technical issue that calls for the help. Therefore, dial a toll-free number to contact our experts. They will guide you with the simple steps to resolve the issue of WiFi extenders not connecting to internet. So, connect your WiFi extender to the main internet connection, and boost the range of your main network.

Belkin WiFi Extender Setup: Quick Manual Guide

Everyone wants to have a wide range of coverage for the network with a single device. With a Belkin WiFi extender, you can have a wide range of coverage. Moreover, with this, there won’t be a need for more extenders as it is alone enough to fulfill your requirements. But, in order to have its benefits, you should have the Belkin WiFi Extender Setup. This blog is going to be a quick manual guide for you to complete the Belkin WiFi Extender Setup. In this blog, you will get to know the steps to complete the setup using the wireless and wired method. Also, the basic troubleshooting steps are explained as well in case setup won’t work for you. Therefore, it covers more for you in less description, saving you a lot of time. So, let’s get started with the procedures without wasting a single minute more!

Steps To Complete Belkin WiFi Extender Setup

As you know, you can complete the Belkin WiFi extender setup using the wired and wireless method. Both the methods are easy. It depends upon which method you are finding easy, or with which you want to complete the setup. This section is going to explain both the methods one by one.

• Wireless Belkin WiFi Extender Setup

Step 1: For the proper setup, connect your extender to the power source which is near to the weak signal area.

Step 2: Now, turn on the power for the Belkin extender.

Step 3: Take any WiFi enabled device of the setup.

Step 4: In the Network Management navigation pane, select the Belkin Extender network and get connected to it.

Step 5: After that, open the web browser on your device and type http://belkin.range in the URL field.

Step 6: The setup wizard will open for the Belkin Extender Setup. 

Step 7: Follow all the on-screen instructions to complete the setup.

Step 8: During the setup, when it will be asked to select the WiFi network, then select your home WiFi network. With this, you are selecting the network which you want to extend.

Step 9: Enter the WiFi password as well for that particular network.

Step 10: When your extender’s network gets connected with the home WiFi network, then your Belkin extender setup is complete.

• Wired Belkin WiFi Extender Setup

If you don’t want to go with the wireless setup or you are facing any issue with the wireless setup. Then, you can choose the wired method for the Belkin WiFi Extender Setup. The steps for completing the Wired Belkin WiFi Extender setup are:

Step 1: Connect the Belkin WiFi extender to the power source near to your system.

Step 2: Take the ethernet cable of your choice and connect one end to the Belkin extender.

Step 3: You should connect the other end to the system or the laptop.

Step 4: Now, turn off the WiFi connection for your system, otherwise it would get connected to the main router’s network. With this, you won’t be able to complete the Belkin WiFi Extender setup.

Step 5: After that, open the web browser on your device and type http://belkin.range in the URL field.

Step 6: The setup wizard will open for the Belkin Extender Setup. 

Step 7: Follow all the on-screen instructions to complete the setup.

Step 8: During the setup, when it will be asked to select the WiFi network, then select your home WiFi network. With this, you are selecting the network which you want to extend.

Step 9: Enter the WiFi password as well for that particular network.

Step 10: When your extender’s network gets connected with the home WiFi network, then your Belkin extender setup is complete.

Step 11: Disconnect the ethernet cable and connect your system again to the WiFi.

Step 12: Also, plug in the Belkin extender at the location where your signal is getting weak for the extender.

Step 13: Now, try to connect any wireless device to the extender’s network.

If your device got connected successfully, then you have completed the Belkin WiFi extender properly. After that, you can complete the configuration as you want. You can change or set the username or password for your extender’s network. If it is not being connected, then you need to follow the troubleshooting steps for the setup.

Troubleshooting For Belkin WiFi Extender Setup

In order to go with troubleshooting, check some points which will make it easy for you to identify the issue. Following are some of the points along with their steps for resolution:

1. Extender is not connecting to the network

When the extender is not connecting to the main wireless network, then you should check the LEDs.

• If the LED is blinking in Amber color, then it means it is too far from the router, so bring it closer to the router.
• If the LED is solid Amber Color, then it means it is connected to the main WiFi network, but the signal is weak. In that case as well, you should move your extender near to the router.

2. Belkin Extender Is Not Being Found During The Setup

When your setup device is not able to find the Belkin extender network, then it means, network is not on. So this, make sure you have ON the power for the Belkin extender.

3. Restoring All The Default Settings Back Again

For restoring the default settings back again for your extender or if you are not able to identify the reason. Then you should reset the Belkin extender back again. For this, follow the following steps:

Step 1: Locate the Reset button on your Belkin extender.

Step 2: Press the Reset button for around 10 seconds, and then release it.

Step 3: First, the light will flash and then get back to the solid color again.

Step 4: When the light will get solid again, then it means your extender got reseted.

Once your extender gets reset, then you will have the default settings for the extender again. Now, you can complete the setup again for your Belkin extender.

Therefore, these are some of the important points that you can use for troubleshooting during the setup. 

Get a Dual-Band Range Extension!

Wrapping up! With the Belkin Range Extender Setup, you can have the dual-band range extension for your network. Moreover, with this, you can have coverage of a wide range of networks. Therefore, with a single Belkin WiFi extender, you will have the signal even in the dead zone area. In case you have issues with the Belkin Range Extender Setup, then you should talk to the experts. Dial a toll-free number, and get instant help from our experts. They will listen to your issue properly,and then will provide the right resolution. Therefore, in the end, you are surely going to have the extended network with the Belkin extender. So, have a Wide range of network extensions with Belkin!

Why Does Belkin WiFi Extender Setup Not Working?

Belkin extenders have gained their popularity because of the coverage of vast areas for the extension of the network. In order to use the Belkin WiFi extender, there is a need to do Belkin WiFi Extender Setup. But, due to some reasons, majorly, connectivity issues, you may face a problem in the extender setup. So, what to do when the Belkin WiFi Extender Setup is not working? This blog is here to help you out as a troubleshooting guide when the Belkin extender is not working. Therefore, once you will access the  Belkin WiFi Extender Setup screen, complete the setup and get your network extended. So, let’s check out the reasons along with the ways to resolve the issue!

What To Do When Belkin WiFi Extender Setup Doesn’t Work?

When you are not able to access the Belkin WiFi Extender Setup screen, then check whether it's on or not. If it is on state and still you are not able to access it, then there are connectivity issues. Therefore, there can be different reasons for this. Now, in the coming points, you will get to know about the different reasons along with the steps for resolution.

1. Incorrect Settings For Wireless Connectivity

The wireless settings of the extender should match with the wireless settings of the system. If they are not the same, then this issue may come. So, to rectify this, go with following steps:

• Open the wireless settings in your system to check the IP address being assigned to the Belkin extender. 
• Check that the assigned IP address is the same as that of the default IP address of the Belkin extender. 
• Make sure the dynamic IP addressing is not on. 
• If it is so, change the dynamic settings to the static one. 
• Also, change the IP address to the default IP address of the Belkin extender.

2. Distance Can Be More!

The other reason may be that you have not connected the extender near to the router. Then, also you can face the issue of not accessing the WiFi extender setup page.

• Make sure to connect the extender in the same room of the router to avoid distance issues.
• Also, there should be less interference of the microwaves or other wireless devices in the room.

3. Outdated Firmware

The other possible reason is the outdated firmware of the Belkin WiFi extender. Therefore, there is  aneed to update the firmware for the extender using the following steps:

• First, open the web browser, and go to the support of the Belkin WiFi extenders.
• Now, search for the model number of the Belkin extender.
• Then, open the Downloads section and search for the latest update for the firmware.
• Wait for the download to get complete. 
• Now, in the new tab, enter the access link i.e. IP address 192.168.206.1 in the URL field.
• The login screen will open.
• Therefore, complete the login using the default username and password.
• Then, click on the Firmware update.
• In the browse section, select the file that you have downloaded.
• Now, click on the Update button to have the updated firmware for your extender.

So, these are the issues. If none of the above steps have worked out for you, then you should reset your extender to refresh it.

Steps To Reset The Belkin Extender

In order to reset the Belkin extender, you should follow the following steps:

Step 1: Find the reset button on your Belkin extender.

Step 2: Then, press the reset button on the Belkin extender and keep it pressed for 10 seconds.

Step 3: Release the reset button after 10 seconds, and wait for the extender to get started again.

Step 4: Once, it got restarted, again access the Belkin WiFi extender setup page to complete the setup.

So, these all are the troubleshooting steps for you in case you are following the trouble with the Belkin WiFi Extender Setup. 

Troubleshooting Done!

Summing up! The above steps are the complete steps for the troubleshooting for the Belkin WiFi Extender Setup. So, once the troubleshooting is done, you can extend your network easily with the Belkin WiFi extender. In case you have issues during the setup process for the Belkin extender, then dial a toll-free number to have the help from the experts. Our expert team will provide the resolution as per the issue. So, complete the troubleshooting, and extend your network without any worries.

Quick Guide To Complete Setek WiFi Extender Setup

With the increase in the usage of the internet, the old WiFi routers are not that much efficient. Though, it seems difficult to change all the setup of the old WiFi router. But, you can extend the range of the old WiFi router with the WiFi extenders. And, for this, Setek WiFi extenders are the best choice. To use the Setek WiFi extender, there is a need to complete the Setek WiFi Extender Setup. The Setek WiFi extenders are the best because they cover a wide range of 2500 square kilometers. Moreover, there will be no more dead zones in that particular area. Therefore, it is always a good idea to have the Setek WiFi Extender and complete its Setek WiFi Extender Setup. Therefore, this blog is going to help you with the steps to complete the setup in two ways: Web browser method and the WPS method. So, let’s start with the procedure of the extender setup.

Steps To Complete Setek WiFi Extender Setup

There are two ways to complete the Setek WiFi Extender Setup. The steps for both ways are defined in the following subsections.

1. Setek WiFi Extender Setup Using The Web Browser 

You can set up your Setek WiFi Extender setup using the web browser on your system. This method is the general method and this will work for everyone unlike the WPS method. Therefore, it is always preferable to complete the Setek Extender WiFi Setup using the web browser method. So, follow the below listed instructions very carefully:

Step 1: first, connect your Setek extender to the power source keeping the distance optimum from the router.

Step 2: When the LED for the power label lights in green color, then start the process of the setup.

Step 3: Then, go to the device in which you want to complete the setup.

Step 4: Now, connect your setup device to the Setek extender’s network either via wireless or wired method.

Step 5: In wired, use ethernet cable or in wireless, open the WiFi settings in the system and connect to Setek network.

Step 6: Then, open the desired web browser.

Step 7: Enter the IP address for the Setek extender i.e. 192.168.10.1 in the URL field.

Step 8: Now, this will open the login screen for the Setek Extender. Or, you may be redirected directly to the setup screen.

Step 9: Enter the default login information in the fields from the sticker over the Setek extender.

Step 10: After the successful login, the screen will show you the list for the available networks in your range.

Step 11: From this list, you will select your main network or home network which you want to extend.

Step 12: Enter the security key for the selected network in the prompt.

Step 13: If the password is right, then you will get connected to the main network, and your signal will be extended.

Step 14: On the successful connection, the WiFi light on the extender will light in the green color.

Step 15: This completed the Setek WiFi extender setup using the web browser method.

Step 16: Unplug the extender from the current location, and connect it at the point from where the signal starts getting weak.

Step 17: Check the WiFi light as it should be green if it is in the main router’s range. If it is in red color, then move your Setek extender a bit closer to the Wifi router.

Step 18: Now, try to connect any wireless device with the extender’s network.

If the device got connected successfully, then you have completed the setup in the right way. Now, next, learn about the WPS method for the Setek WiFi extender setup.

2. Setek WiFi Extender Setup Using WPS Method

There is no doubt that the WPS method is the easiest one. But, it is possible only for those whose routers have a WPS button. Therefore, it is not possible for everyone to follow this method. If your router has the WPS button, then you should follow the instructions given below:

Step 1: For the quick setup, connect the extender to the power source in the same room as that of the router.

Step 2: Wait for some time till the power LED light turns into a solid green color.

Step 3: Then, first, press the WPS button for 2-5 seconds on the Setek extender.

Step 4: After that, immediately press the WPS button on the main router for 2-5 seconds.

Step 5: With this, the WPS lights will start blinking on both the router and the extender.

Step 6: Let them blink for 10-15 seconds as it will take time to get connected with the router.

Step 7: On the successful connection, the blinking lights will get stable into green color on both devices.

Step 8: Unplug the extender from the current location, and connect it at the point from where the signal starts getting weak.

Step 9: Check the WiFi light as it should be green if it is in the main router’s range. If it is in red color, then move your Setek extender a bit closer to the Wifi router.

Step 10: Now, try to connect any wireless device with the extender’s network. If your main WiFi network is password-protected, then enter the same password to get connected with the extender’s network.

So, this completes the Setek WiFi extender setup with the WPS method. So, both the methods are explained for the setup. Now, it depends upon you which to follow for the setup of your extender.

Setek Setup Is Working!

Summing up! The Setek extender is working as its setup has completed successfully. This blog has defined both the methods for the Setek WiFi Extender Setup using the WPS and the browser method. On the successful setup, you can connect your device successfully with the Setek extender’s network. As it has a wide range, therefore, you can connect with the extender’s network anywhere at home.In case, you are finding any difficulty for the Setek WiFi Extender Setup, then ask our expert for help. You will get the expert solution for your issue, and you will be able to connect in the end. So, with the Setek WiFi extender working, get the benefits of the internet in the dead spots as well.

Get Help For Netgear WiFi Extender Not Connecting To Internet

Netgear routers are known as universal routers as they have a different range of routers for every type of user. But, it does not lead to the fact that there won’t be any kind of issue anytime. Therefore, if you are facing the issue of the Netgear WiFi extender not connecting to internet, then you should troubleshoot it. This blog is going to explain to you the steps to troubleshoot your Netgear extender. As the end result, you will be able to connect to the internet. Once you regain access to the internet, you can complete your work. So, let’s get started with the troubleshooting guide for the Netgear WiFi extender.

Steps To Resolve Netgear WiFi Extender Not Connecting To Internet

It is very important for every extender to connect to the internet as only then they could work. If the Netgear WiFi extender is not connecting to the internet, then it means there is a major issue. So, follow the steps mentioned below to resolve this issue quickly:

Step 1: Make sure your Netgear WiFi extender is in the range of your existing router like in the same room.

Step 2: Ensure your internet services are in an active state as the dropping of the signal can lead to this problem.

Step 3: Check the network/internet LED lights as they should light when connected to the internet.

Step 4: Check the ethernet cable as it should be properly connected if you are using it.

Step 5: Try to login with the default IP address instead of the login link i.e. 192.168.1.250.

Step 6: If still not able to access the web page, then reset your browser again to delete unwanted files.

• To reset the browser, go to the History of the browser, and delete all of it.
• Also, delete all the cache memory and cookies as saved data can cause the issue.
• Now, close the browser and open it again.

Step 7: If still there is an issue, then try another web browser for the login.

Step 8: If earlier you were using the wireless connectivity method, then try the ethernet cable for connectivity.

Step 9: Go to the Network Settings of your system. Make sure the static IP address is assigned as a default IP address.

Step 10: If still nothing works, then reset your Netgear router to bring the settings back to the factory default settings.

• Sometimes, different settings also make the extender stop accessing the internet.
• Find the reset button for your extender, and press it.
• Keep the reset button pressed for around 1o seconds and then release it.
• Now, reboot the Netgear WiFi extender again, and complete the login process to configure it again.

So, these are the troubleshooting steps for your Netgear WiFi extender not connecting to the internet. Once all the steps are followed, then you can access the login page for your extender. So, you can use your extended signal as you want.

Extend Your Network Without Any Trouble!

Summing up! This blog cum guide is definitely going to help you with the Netgear WiFi Extender Not Connecting To Internet troubleshooting. These steps are important to follow as without the internet you cannot extend your network. So, if still, you face any issue with the connectivity after following these steps, contact us for an expert solution. Our expert team will provide you with the proper solution and will make sure that you connect to the internet. So, get ready to extend your home network with a Netgear WiFi extender without any trouble using this guide. So, forget the Netgear WiFi extender not connecting to internet issue. Finally, you will have an uninterrupted internet to work.

Know The Steps To Do Factory Reset TP Link Extender

Under various circumstances, there may be a need to factory reset your extender. Even for troubleshooting purposes, the factory reset method is used. The factory reset will bring back all the settings again to default. Therefore, it would be just like a new device and you can do the configuration from scratch. Now, if you are looking for the steps to Factory Reset TP Link Extender, then you are in the right place. Moreover, do you know, there are different methods available to Factory Reset TP Link Extender? Well, this blog is going to explain to you all the methods to reset your TP-Link extender. So, let’s check out the steps for all the methods:

Different Methods For Factory Reset TP Link Extender

A factory reset can be required in different conditions. Sometimes, you don’t know about the current credentials for your extender. Then, a factory reset can help you to log in with the default credentials. Sometimes, you know the login credentials, but you want to revert back some of the settings about which you don’t know them. So, for both cases, you can factory reset TP Link extender with the following methods.

• Method 1: Using The Web Browser Login

This method is only helpful when you know about the current admin credential for the extender login. But, you want to revert back to the settings about which you don’t know. Then, in that case, you can factory reset your TP-Link extender with the web browser using the following steps:

Step 1: Make sure your system is connected to the TP-Link extender’s network as only then you can access the login page.

Step 2: Then, launch a web browser such as Google Chrome in your system.

Step 3: Now, either use the IP address 192.168.0.254 or the link tplinkextender.net in the address bar.

Step 4: This will open the Login screen for your TP-Link extender.

Step 5: Then, enter the current username and password of the TP-Link extender in the required fields.

Step 6: Click on the Login button to reach the admin panel.

Step 7: On the admin panel, locate the option System Tools on the left-hand side of the page.

Step 8: Under that, select the option of Backup & Restore.

Step 9: Then, select the option of the Factory Reset.

Step 10: Go with the on-screen instructions being shown on the screen, and reset/reboot your TP-Link extender.

Step 11: Now, you can start the configuration process again for your TP-Link extender.

So, these are the steps for the factory reset using the web browser method. In case, you don't know anything about the login credentials, then follow the methods discussed next for factory reset.

• Method 2: Using The Reset Button At The Back Of Extender

Now, as you don't know about the current credentials, then you can use the reset button present at the back of the extender. Follow the instructions mentioned below:

Step 1: Make sure the power is on for your TP-Link extender.

Step 2: Then, find the reset button present at the back of your extender.

Step 3: Then, press the reset button and keep it pressed for around 2 seconds.

Step 4: Wait for all the LEDs to go off, and then light again.

Step 5: After that, wait for the extender to get rebooted properly.

Step 6: Now, you can start with the procedure for the configuration of your extender on your system.

• Method 3: Hard Reset Using Hidden Reset Option

Some of the extenders don’t come with the proper reset button. Then, in that case, there is a need to locate the hidden reset option at the back of the extender. Therefore, for this, you need to go with the following instructions:

Step 1: Take a needle or any other pin-point object.

Step 2: Now, locate the hidden reset button at the back of your extender which cannot be pressed with the finger.

Step 3: Press the hidden reset button with the pin-point object and hold it for 8-10 seconds.

Step 4: First, all the LEDs will go off, and then will start lighting one by one.

Step 5: Wait for the TP-Link extender to get rebooted properly. 

Step 6: Now, you can start the configuration for the TP-Link extender in your system again.

So, these all are the methods you can follow for the Factory Reset TP Link Extender. Depending upon your case, you can choose the method, and then follow those steps. Once, factory reset is done, you can change the configuration as you want.

Configuration Steps For TP-Link Extender!

As your TP-Link extender is in a factory reset state, therefore, all the settings are in default now. So, you need to complete the login with the following steps in order to configure it:

Step 1: Launch a web browser like Google Chrome in your system.

Step 2: Then, enter the default IP address 192.168.1.1 in the URL field.

Step 3: On the login screen, enter the default credentials mentioned on the label of the TP-Link extender (mostly at the back).

Step 4: Click on the Login button, and again do all the configuration to use your extended network.

So, these are the actual steps in order to configure your TP-Link extender. Make sure, you don’t skip any of the steps, otherwise, there would be again the need for the factory reset.

TP-Link Extender Is Back to Default!

Wrapping up! With Factory Reset TP Link Extender operation, all the settings and data have come to default again. Therefore, now you can use all the default information again for login, or configuration purposes. Whether you know the current credentials or not, all the methods are defined for the Factory Reset TP Link Extender. Still, after the factory reset, if there is an issue with the TP-Link extender, then contact our experts. You will get your query resolved in no time. So, get ready to extend the range of your signal with TP-Link Extenders.