Basic Steps For The Setup Of Belkin WiFi Range Extender

If you are facing several dead zones i.e. areas where you cannot receive the WIFi signals, then you need a WiFi extender. Belkin WiFi range extender is one of the best range extenders that helps you to enjoy internet connectivity in each and every corner of your home. To enjoy the connectivity services of the Belkin range extender, you need to set it first. If you don’t know how to set up the Belkin range extender then don’t worry. In this blog, we are going to discuss the basic and easy steps of the Belkin WiFi Extender Setup. Read the complete blog and follow the step-by-step guideline to set up the Belkin extender.

Steps for the setup of Belkin WiFi range extender

Before moving forward with the setup of the Belkin WiFi range extender you have to make sure that you are having your WiFi network SSID and password. Following are the steps for the setup of the Belkin WIFi range extender:

• First of all, you need to plug in your extender to the wall socket and then turn it on.
• Now you need to establish a connection between your router and the Belkin range extender. To establish the connection you can use an ethernet cable or you can establish the connection wirelessly.
•  After that, you need to open your web browser and type extender.range in the address bar of your web browser and then press enter key.
• Next, the Belkin setup window will display on your screen. You need to click on the start tab to initiate the process.
• Thereafter, a list of available networks will appear on your device screen, you need to select the network that you want to extend and then provide a password followed by click on the next button.
• Then, you will get an extender network ID and password for your extender.
• Further, you need to check all the details and click on the create button. If you want to edit the details then click on the edit button.

Steps for the setup of Belkin extender by using WPS

You need to follow the below-mentioned steps to set up the Belkin WiFi range extender by using the WPS button:

• First of all, you need to plug the Belkin range extender into the wall socket and turn it on.
• Now, you need to press and hold the WPS button on the extender until the small light flashes.
• Next, press the WPS button on your router and wait for the LED light.
• Then open the web browser and type http://belkin.range and press enter.
• After that, you need to click on the get started button to start the process. The web server will search for all the available networks.
• Thereafter, you need to select the wireless network that you want to extend.
• Further, you need to enter the WiFi network password and then click on the next button.
• Finally, you need to check the details of the network and then click on the create extender network button. If you want to edit the details then click on the edit button.

That’s all about the Belkin WiFi Extender Setup. Hopefully, by following all the above-mentioned steps you can easily perform the Belkin range extender setup. If still, you are facing any issue with any step, please don’t hesitate to contact your highly-experienced experts.

How To Fix If Wifi Extender Is Connected But No Internet

Have you ever faced a situation where your WiFi extender is connected but there is no internet? Sometimes you are using your internet through the extender and suddenly get offline. That is a very irritating situation. But you need not panic at all because you are at the right post. Here we are going to discuss some simple hacks to troubleshoot the issues. WiFi extender is the ultimate solution to extend the existing network. You just need to connect your router with the extender and the extender will amplify the WiFi signals. But sometimes you may face WiFi Extenders, No Internet situations. 

Troubleshooting: WiFi extender connected to the network but no internet

In this section, we are going to share some simple troubleshooting methods with you to resolve the internet connectivity issue.

• Use Antivirus

Sometimes the virus in the device can cause internet connection issues. To overcome this problem, one should use antivirus. If you are using windows as an operating system then the built-in firewalls are there. If you are using other devices such as tablets or smartphones then you need to download the antivirus.

 In some cases, if you are already on the antivirus then this can also cause an internet connection error. In this case, you need to disable the antivirus on your device.

• Use the DNS provider

Sometimes, the issue is with the corrupted DNS. In that case, you should use the Google DNS server or Cloudflare DNS. Because when you shift to a better DNS provider, it will boost up the speed of your internet. 

• Delete the DNS Cache

If you switched to a different DNS server, but still got the internet connection error, then you need to delete the DNS cache. For deleting the DNS cache you need to press Window+R from your keyboard and then you need to type cmd in the run box and press enter key. A new window will appear on your screen where you need to type “ipconfig/flushdns” and then press enter. As a result, the DNS cache will be deleted and the internet will start working properly.

• Don’t filter the Mac Address

Mac address filtering on the internet router can also cause an internet connection error. To resolve the issue you need to disable the Mac address filtering on your device. You need to make sure that your device is not using the spoofing of the Mac address. Once you disable the Mac address filtering on your device, the internet will start working properly.

• Use less congested wireless channel

If you are using a less congested wireless channel then the chances of network interference are reduced. The internet connection issue got resolved. If this is not working then contact your internet service provider.

So, these are some simple hacks to get rid of WiFi Extenders No Internet issue. By following the above-mentioned hacks you can resolve your internet connectivity issues. If still, you are facing any issues, please feel free to contact our highly-experienced technical professionals. 

How To Fix If Wifi Extender Is Connected But No Internet

Have you ever faced a situation where your WiFi extender is connected but there is no internet? Sometimes you are using your internet through the extender and suddenly get offline. That is a very irritating situation. But you need not panic at all because you are at the right post. Here we are going to discuss some simple hacks to troubleshoot the issues. WiFi extender is the ultimate solution to extend the existing network. You just need to connect your router with the extender and the extender will amplify the WiFi signals. But sometimes you may face WiFi Extenders, No Internet situations. 

Troubleshooting: WiFi extender connected to the network but no internet

In this section, we are going to share some simple troubleshooting methods with you to resolve the internet connectivity issue.

• Use Antivirus

Sometimes the virus in the device can cause internet connection issues. To overcome this problem, one should use antivirus. If you are using windows as an operating system then the built-in firewalls are there. If you are using other devices such as tablets or smartphones then you need to download the antivirus.

 In some cases, if you are already on the antivirus then this can also cause an internet connection error. In this case, you need to disable the antivirus on your device.

• Use the DNS provider

Sometimes, the issue is with the corrupted DNS. In that case, you should use the Google DNS server or Cloudflare DNS. Because when you shift to a better DNS provider, it will boost up the speed of your internet. 

• Delete the DNS Cache

If you switched to a different DNS server, but still got the internet connection error, then you need to delete the DNS cache. For deleting the DNS cache you need to press Window+R from your keyboard and then you need to type cmd in the run box and press enter key. A new window will appear on your screen where you need to type “ipconfig/flushdns” and then press enter. As a result, the DNS cache will be deleted and the internet will start working properly.

• Don’t filter the Mac Address

Mac address filtering on the internet router can also cause an internet connection error. To resolve the issue you need to disable the Mac address filtering on your device. You need to make sure that your device is not using the spoofing of the Mac address. Once you disable the Mac address filtering on your device, the internet will start working properly.

• Use less congested wireless channel

If you are using a less congested wireless channel then the chances of network interference are reduced. The internet connection issue got resolved. If this is not working then contact your internet service provider.

So, these are some simple hacks to get rid of WiFi Extenders No Internet issue. By following the above-mentioned hacks you can resolve your internet connectivity issues. If still, you are facing any issues, please feel free to contact our highly-experienced technical professionals. 

Know The Simple Steps For Linksys WiFi Extender re6300 Setup

Do you want to amplify the existing wireless signals? Are you getting poor WiFi signals even if your router is present in the next room? Facing difficulty in boosting the WiFi range and connectivity in your home and office? If so then you must invest in a Linksys WiFi extender re6300. It is an amazing device that helps you overcome the dead spots in your home or office. With Linksys WiFi range extender, you can get better WiFi network coverage and signal strength. Now, you are thinking about how to perform Linksys WiFi extender re6300 setup. Well, don’t panic! Here, in this blog, we have shared the step-by-step instructions that assist you in the Linksys re6300 range extender setup. 

Simple Guidelines for Manual Linksys WiFi Extender re6300 Setup

Look at the below-mentioned instructions for the Linksys WiFi extender re6300 setup using the manual method. You need to follow all the steps carefully without skipping any steps:

Step 1: The first step is to plug in your Linksys re6300 WiFi range extender into an electrical outlet. Turn on your Linksys extender.

Step 2: After that, connect your Linksys range extender to the home router by using an Ethernet cable.

Step 3: Thereafter, turn on your computer or laptop. Connect your device to a reliable wireless network.

Step 4: In the next step, launch any web browser of your choice. Make sure that you are using the updated web browser.

Step 5: Enter extender.linksys.com in the URL bar of the web browser. 

Step 6: Now, you will be redirected to the Linksys extender login web page. 

Step 7:  In the next step, you need to enter the default username and password in the respective fields. 

Step 8: Once you enter the correct default login credential details, you need to tap on the login button.

Step 9: A new screen displays on the screen showing the Linksys WiFi extender re6300 setup instructions. 

Step 10: Follow on-screen instructions to complete the Linksys WiFi extender re6300 setup process. 

Instructions for Linksys WiFi Extender re6300 Setup via WPS Method

WiFi protected setup (WPS) is known as one of the simplest and easiest ways for Linksys WiFi extender re6300 setup on your device. Go through the below instructions for the setup of the Linksys WiFi extender re6300 using the WPS method:

Step 1: The first step is to plug in your Linksys re6300 WiFi range extender into the power socket. Turn on your Linksys range extender.

Step 2: After that, press the WPS button located on your wireless range extender.

Step 3: Within two minutes, also press the WPS button on your wireless home router.

Step 4: Now, you have to wait for some time until the WPS LED power light becomes stable and solid green.

Step 5: Next, unplug your Linksys re6300 WiFi range extender from the electrical wall socket.

Step 6: At last, place your extender anywhere where you are facing internet connectivity issues. It is recommended to place your extender halfway between the extender and the place where you face dead spots. 

That’s it! With the above-mentioned instructions, you can easily complete the Linksys WiFi Extender re6300 Setup on your device whatever you are using. Once you are done with Linksys WiFi extender re6300 setup, you can enjoy the uninterrupted streaming and can play online gaming. However, if you are facing any difficulty in setup your Linksys extender then you can contact our professional experts at our toll-free number. Our experts are available all around the clock and help you in resolving the extender-related issues immediately.

Troubleshooting Methods Of Netgear WiFi Extender

To get a fast WiFi network at home and workplace, Netgear extender is the ultimate solution. Netgear extenders receive the incoming signals from the router and then amplify the signals. Like any other electronic device, Netgear WiFi Extender also encounters technical issues. In this blog, we will discuss the methods of Netgear wifi extender troubleshooting.

If you are sitting in the one corner of your home or office and experiencing low internet speed then use the Netgear WiFi extender. It will improve the speed of your internet. But sometimes you may face many technical issues with the extender. So, in this post, we are shedding some light on the most common issues of Netgear extenders and how to troubleshoot them.

Troubleshooting methods of Netgear extender

Let’s discuss the issues related to Netgear extenders and their troubleshooting methods.

1. Not able to detect 5GHz band: If your Netgear WiFi range extender is facing any issue while detecting the 5GHz band network then follow the following guidelines to troubleshoot this issue:

• First of all, you need to place your extender and router in the same room.
• Now, you need to log in with the web user interface.
• After login, you have to look for the wireless settings option.
• After that, you need to locate the channel option.
• Thereafter you have to change the WiF channel.
• Finally, click on the apply button.

Once you are done with the reconnection check if it is able to detect the 5GHz band or not.

2. Change the network extender name: Netgear range extenders have their default username and passwords. You have to change the default details to avoid any unauthorized activity. But sometimes you face problems while doing so. No worry, here we are going to discuss the easy way to change the details.

• First of all, you have to open the web browser on your device.
• Now, you need to log in with the Netgear range extender.
• After that, a login window will open.
• You need to enter your network name.
• Then enter the new password.
• Finally, you need to click on the save button to save the changes.

By following the above-mentioned steps you can change your network name and password easily.

3. Losing internet: Next big issue is that your Netgear range extender is losing the network again and again. That is very irritating. In order to troubleshoot this issue, follow the following guidelines:

• You need to make sure that your Netgear extender is placed properly.
• There should be a proper power supply.
• The last option is to update the extender firmware.

4. Blinking LED light: Another major problem is blinking LED light. This happens because the extender is not receiving the proper power supply or the firmware is not updated. To resolve this issue, follow the following steps:

• You need to make sure that your Netgear extender is receiving enough power supply.
• You can restart the Netgear extender.
• Finally, uninstall the old version of the firmware and download the updated one.

5. Firmware update: Sometimes, the problem is with the outdated firmware. This can cause interruptions while using Netgear extender. To resolve the issue, update the new version of the firmware. Following are the guidelines:

• First of all, you have to make sure that your extender is connected with the router's WiFi.
• Now, you have to visit the Netgear support center.
• Then, enter the model number and click on the download button.
• After that, you have to select the firmware version and then click on download again.
• Now a zipped file will download, unzip that file.
• Thereafter, type mywifiext.net in the address bar of the web browser.
• A login page will open, in that login page enter the username and password.
• Now, you have to click on the firmware update.
• After that, click on the browse button and then locate the file.
• Moving forward, you need to click on the upload button.
• Finally, the firmware update will start. 

So, these are the most common problems and their troubleshooting method. In this blog, you learned about Netgear WiFi Extender Troubleshooting methods. If you are still facing any issues then get in touch with our experts for instant help.