The TP Link is the brand which everyone knows from so long. Therefore, the trust on the TP-Link brand makes the TP Link WiFi extenders as the trustworthy product. This is the reason most of the users like to buy the TP Link extenders for the extension of the network. To do so, there is a need to complete the TP Link WiFi Extender Setup. But, what to do if you do not have the ethernet cable with them. In that case, they can complete the TP Link WiFi Extender Setup using the wireless connectivity. There are two methods available for the extender setup using the wireless connectivity- Wireless manual method and the WPS method. In this blog, you will get to know about the steps to complete the setup using both the wireless methods. So, check out the steps below, and complete the setup to get connected with the extended network.
TP Link WiFi Extender Setup Using Wireless Manual Method
The wireless manual method, you will complete the setup with the help of the browser without using the ethernet cable. Therefore, the steps to complete the TP Link WiFi Extender Setup using the wireless manual method are defined below:
Step 1: First, take the TP Link extender, and connect it to the power source.
Step 2: Try to connect the TP Link repeater in the same room as that of the router to avoid any interference.
Step 3: Now, turn on your TP-Link extender and wait for it to get started completely.
Step 4: After that, turn on the system in which you want to complete the setup.
Step 5: Disconnect your system dfrm any other network, and search for the available networks.
Step 6: Then, select the name of your TP Link extender’s network, and connect to it.
Step 7: In case, it asks for the password, then enter default password mentioned on yoru extender.
Step 8: After that, launch the web browser like Google Chrome in your system.
Step 9: Use the IP address 192.168.1.1 in the address bar, and press the Enter key.
Step 10: Then, the login screen will open up for the TP-Link repeater.
Step 11: Use the default credentials mentioned over the TP-Link extender in order to complete the login.
Step 12: Click on the Login button.
Step 13: After that, you will land on the admin panel for the TP Link repeater.
Step 14: Then, the list will open for the networks available in your range.
Step 15: Select the name of your main home network.
Step 16: Further, it will ask for the password. So, enter the current password for your main WiFi network.
Step 17: Click on the Connect button to extend your network.
Step 18: Change the other settings as well if required, and save all the changes.
Step 19: Then, disconnect your TP Link extender from the current location.
Step 20: Connect it somewhere near to the weak zone so that the network could get extended in a real manner.
Step 21: Connect your device with the extended network, and get the full-range for the network.
In this way, you can easily complete the setup for your TP Link extender using the Wireless manual method. There is another option available as well of the WPS. For that, you need to follow the next section.
TP Link WiFi Extender Setup Using WPS Method
The WPS method is the easiest method for the competition of the setup. But, the only thing that is required is that your router must support the WPS feature. If it so, then you need to go with the following steps:
Step 1: First, take the TP Link extender, and connect it to the power source.
Step 2: Try to connect the TP Link repeater in the same room as that of the router to avoid any interference.
Step 3: Now, turn on your TP-Link extender and wait for it to get started completely.
Step 4: Then, first press the WPS button on the router, and wait for the WPS/ WiFi light to blink.
Step 5: After that, in 1-2 minutes, you need to press the WPS button on the extender as well.
Step 6: Keep it pressed till it also doesn't start blinking.
Step 7: Then, release them and wait for both the lights to get stable.
Step 8: When both the lights get stable, then it means, your network gets connected.
Step 9: If the LED goes off then it emans connection failed, and you need to start it again.
Step 10: If connected successfully, then connect your extender somewhere near to the weak zone.
Step 11: Connect your device with the extended network, and get the full-range for the network.
So, these are the two ways to complete the TP Link WiFi Extender Setup using the wireless connectivity.
No More Ethernet Cable Required!
Wrapping up! Though the ethernet cable provides the security, there is an uninterrupted network. But, not everyone used to have the ethernet cable for the setup. In that case, there is a need to complete the TP Link WiFi Extender Setup using the wireless connectivity. In this blog, you get to know about the two methods for completing the TP Link WiFi Extender Setup. The steps for both the methods are explained in detail so that you don’t face any confusion. In case, you are getting confused with the steps or got stuck in between. Then, you can take the help of our experts. They will help you in knowing the best solution and will guide you through the whole setup procedure. Therefore, you would be able to complete the TP Link WiFi Extender Setup in no time. After this, you can easily say, there is no need for the ethernet cable. You can get connected to the extended network with full range using the wireless connectivity.
No comments:
Post a Comment