How Do I Connect TP-Link WiFi Extender Setup?

Are you fed up from the WiDi dead zones? Want to boost the WiFi signals to the long distance? Well, don’t worry! By installing the TP-Link WiFi extender, you will get reliable WiFi coverage throughout your home or office. It will help you in boosting the signal strength to a long extent and works efficiently with the standard wireless router. Once you configured your TP-Link extender, you can place it at any place of your preference without any further settings. The WiFi signal light will guide in searching the perfect location. With TP-Link WiFi range extender, you can easily access and manage the extender through smart devices. Here, in this blog, you will get to know “How to complete TP-Link WiFi extender setup”. Scroll down and check out the steps. 

Instructions for TP-Link WiFi Extender Setup

There are different methods through which you can complete the TP-Link WiFi extender setup on your device such as manually, using WPS method etc. 

TP-Link WiFi Extender Setup Manually

Whenever you purchase a new TP-Link extender then you will get a manual with it with which you can easily set up your extender device. The process of setting up the TP-Link WiFi extender is quite simple. Follow the below instructions step-by-step for the TP-Link WiFi range extender setup on your device manually:

Step 1: The first step is to turn on your modem, router and computer before establishing a connection.

Step 2: After that, connect the modem to the WAN port of your router using the Ethernet cable. 

Step 3: Next, take an Ethernet cable and connect your computer to the LAN port of the router. 

Step 4: You need to switch on your modem and router. After waiting for some time, also turn on your modem.

Step 5: Thereafter, log in to the web access page of your router device.

Step 6: In the next step, you need to configure the WAN connection. 

Step 7: Now, enter the username and password in the respective field. 

Step 8: At last, you need to verify the WAN tab in the Status page to find whether the connection has been established or not. 

TP-Link WiFi Extender Setup via WPS Button

Go through the below steps for TP-Link WiFi extender setup through WPS Button:

Step 1: Firstly, connect the power adapter of the TP-Link WiFi extender to the electrical outlet.

Step 2: After that, switch on your range extender and wait for some time until the power light becomes solid and stable. 

Step 3: Make sure that your host network features the WPS button.

Step 4: Thereafter, press the WPS button given on the back side of the main router to connect your extender to the router.

Step 5: Now, wait for some time until the WPS LED light starts blinking or becomes solid. If the LED light does not start blinking then press the WPS button once again. 

Step 6: Next, you need to press the WPS button on your TP-Link WiFi range extender within the two minutes. 

Step 7: Wait for some time until the LED light on your device turns to blue. The blinking of blue light indicates that you have established the connection successfully.

Step 8: In case you are using the dual-band router then you have to repeat all the above steps in order to connect the other band to the TP-link range extender.

Step 9: If you are facing trouble in connecting the TP-Link range extender then make sure that your both networks are sharing the same network names. 

With the above-mentioned instructions, you can easily complete the TP-Link WiFi Extender Setup on your device without any trouble.