Complete Guide On Linksys WiFi Extender Setup RE6300

Linksys RE6300 WiFi extenders have gained much popularity over the past few years because of their durability and significantly enhancing the WiFi signals features. Linksys WiFi Extender Setup RE6300 gives you the top-notch signal coverage to perform your daily tasks over the internet. Linksys RE6300 WiFi range extender amplifies the WiFi signals and eliminates the dead spots. You can set up your Linksys RE6300 WiFi range extender manually as well as through the WPS button. In this blog, you will get to know the simple and easy steps to set up the Linksys RE6300 WiFi range extender. Let’s get started.

Guidelines to set up the Linksys RE6300 extender manually

You can set up your Linksys RE6300 extender through an installation CD that came along with the extender. But if you lost the installation CD, in that case, you can set up the Linksys RE6300 extender manually. In order to set up your Linksys RE6300 WiFi range extender, follow the below steps:

Step 1: First of all, plug your Linksys RE6300 range extender into the wall socket and then turn it on.

Step 2: After this, grab an ethernet cable and connect your Linksys RE6300 to the home router with this ethernet cable.

Step 3: Now, turn on your computer or laptop and then connect it to the reliable WiFi network.

Step 4: Next, open an internet browser on your system and then go to the official website of Linksys.

Step 5: Then, a login page of Linksys extender will appear on your device screen.

Step 6: Where you need to enter the default login username and password and then click on the login button.

Step 7: Thereafter, a series of instructions will appear on your next screen to complete the setup of the Linksys RE6300 extender.

Step 8: Follow all the instructions till the end to finish the setup of Linksys RE6300 WiFi range extender.

Guidelines to set up Linksys RE6300 extender with WPS button

This is the easiest method to set up the Linksys RE6300 WiFi range extender. You just need to press the WPS button on the router and the extender. Follow the below steps to set up the Linksys RE6300 WiFi range extender through the WPS methods:

Step 1: First of all, plug your Linksys RE6300 range extender into the wall socket and then turn it on.

Step 2: Now, locate the WPS button on the Linksys RE6300 range extender. Generally, the WPS button is present at the bottom or backside of the extender.

Step 3: Next, press and hold the WPS on the Linksys RE6300 extender for about 2 minutes.

Step 4: After this, press and hold the WPS button on the router.

Step 5: Then, wait for a solid green WPS LED light.

Step 6: Now, you can unplug the Linksys RE6300 extender and plug it near the dead spots.

Hopefully, by following the above-mentioned steps you can easily set up your Linksys RE6300 WiFi range extender. Linksys WiFi Extender Setup RE6300 process is quite easy, still, if you are facing any issue then feel free to contact us.