Learn Easiest Way For How To Do A TP-Link Extender Reset

Having trouble in setting up your TP-Link extender? Unable to access the internet connection on your computer through the adapters? Well, by performing the TP-Link extender reset, you can easily resolve these issues. TP-Link WiFi range extender is an amazing device that helps you in boosting the weak WiFi signals and fixing the low signal problem in home or office. If you are facing the issues with your TP-Link WiFi range extender and unable to reset it then scroll down till the end and you will get to know the simplest instructions for the TP Link extender reset. Keep reading to reset the TP-Link extender using different methods. 

Steps for Factory Reset TP-Link WiFi Range Extender from Software 

Go through the below instructions for factory reset the TP-Link WiFi range extender:

Step 1: The first step is to plug-in your TP-Link extender in the electrical outlet and after that connect it by using the WiFi.

Step 2: Next, login to your TP-Link WiFi range extender by using the IP address that you have configured during setup your device for the first time or use the IP address 192.168.0.254 to login to TP-Link extender. 

Step 3: In the next step, go to the settings and then tap on the system tools.

Step 4: Tap on the backup and restore option from the left pane of the menu.

Step 5: Choose the factory restore option to perform the factory reset on TP-Link WiFi range extender.

Step 6: Now, you will see that a pop-up message displays on the screen saying, “are you sure that you want to do factory default settings?” Tap on the yes button to proceed further.

Step 7: Your TP-Link WiFi range extender starts rebooting with factory default settings and a new name for your WiFi. 

Step 8: After that, check the WiFi signals to confirm that the WiFi booster device is factory reset successfully. 

With the above steps, you can do a soft reset on your wireless range extender device and again use it to boost the wireless network signals. 

Instructions for Hard Reset on TP-Link WiFi Range Extender 

The hard reset is performed when you forget the login credential details of the TP-Link WiFi range extender after the setup process including username, password, IP address. Here are the steps that you need to perform to reset the TP-Link WiFi range extender: 

Step 1: Firstly, plug in your TP-Link range extender into the electrical outlet. It allows the device to turn it on completely. 

Step 2: After that, take a paper pin or needle or any sharp object to press the reset button. You will get the reset button on the backside of the Rockspace extender. 

Step 3: Press the reset button for some time and thereafter the TP-Link extender starts rebooting.

Step 4: Now, wait for some time until the rebooting is completed. You need to ensure that the WiFi signal shows the default SSID name. 

Hopefully, by following the above-mentioned instructions, you can perform a TP-Link Extender Reset to factory default settings without facing any difficulty. Once you reset your device, you can enhance the WiFi signals to a long extent and also fix various issues associated with it.