Sometimes, people don't have much time, and they have to complete the setup instantly. It is so because they need to use it at the same time. So, they cannot wait to complete the setup using the manual method. Though, you have the option to complete the TP Link WiFi Extender setup with the WPS. For this, you don’t need to wait much longer, or there is no need to complete the certain instructions. So, you would be able to complete the TP Link WiFi Extender setup in around 1 minute. From this blog, you are going to learn the steps for the TP Link WiFi Extender setup with WPS. So, without wasting much time, let’s understand the steps for the setup of the TP Link extender with WPS.
Steps For Completing The TP Link WiFi Extender Setup With WPS
It is not difficult to complete the setup with any method. Specifically, with the WPS method, it is the easiest one. So, if you don’t have time, and want to complete all the setup quickly. Then, you must go with the following steps:
Step 1: Make sure your range extender is connected to the power source near to your main WiFi router.
Step 2: Then, press the WPS button present on your main router of which you want to extend the network.
Step 3: The LED light will start blinking on the router for the WPS. If it does not blink, then you need to press the WPS button again.
Step 4: Within 2 minutes of it, you need to press the WPS button on the TP Link extender as well.
Step 5: The WPS LED will also start blinking on the TP Link extender as well. If it does not blink, then you need to press the WPS button again.
Step 6: It may take 1-2 minutes for the LEds to get stable.
When the LEDs get stable, it means your TP Link wifi extender has got connected with your main Wifi network. For making sure it has connected, the LED on the extender will light, no matter which color it is. Along with that, you will see the signal bars specifying whether the connection is good or not. If the bars showing the weak signal or the LED are red. Then it means it is connected to the main router, but not in range. So, there is a need to move closer to the main router. In case, there is no LED lighting, then you need to follow the above steps again in order to complete the WPS setup.
Complete It Quickly!
Wrapping up! If you want to complete the TP Link extender setup quickly, then you must go for the WPS button. There is just a need to press the two buttons, and your setup is complete. If you are being confused with the TP Link WiFi Extender Setup with the WPS, then you should go with this blog. Though, if you face any kind of problem, then we are here to help you out. There is just a need to contact us on a toll-free number. Hence, there is no need to go with the long steps of the ong procedures. So, complete the setup quickly, and have a complete range of networks to attend the important meetings.
No comments:
Post a Comment