Learn The Easiest Way To Reset TP Link Extender

Due to the advancement of technology, the internet has become the top-most choice of people. TP-Link has gained more popularity in a few years. But sometimes users encounter problems with TP-Link extenders like they have forgotten the username and password. Some problems with TP-Link extenders cannot be sorted because you don’t know the exact cause of the problem. In such situations, you need to reset the Tp-Link range extender. The TP Link Extender Reset task is very simple and easy. Resetting the TP-Link extender to its factory default settings will help you to make a fresh start.

Methods to reset the TP-Link extender

There are two methods to reset the TP-Link extender: one is a hard reset of the TP-Link extender and another is by using the extender’s management page.

Method 1: Hard reset of the TP-Link range extender

To hard reset the TP-Link range extender to its factory default settings, use the WPS/reset button. You can find the reset button at the front or backside or side panel of the TP-Link range extender. Follow the below-mentioned steps to hard reset the TP-Link WiFi range extender:

Step 1: First of all, press the WPS or reset button on the TP-Link extender and hold it for 8 seconds.

Step 2: Once you see a slow flashing LED light, release the button and wait until the extender reset to its factory default settings.

Once you are done with the reset of the TP-Link extender, now you need to configure your extender. You can find all the default settings under the bottom label of your TP-Link range extender. If you backed up the configuration file then you can use it to configure the extender.

Method 2: Reset the TP-Link range extender by using the range extender's management page

If pressing the WPS button is not working then you can use the TP-Link extender management page to reset the extender without causing any hardware or software damage. Go through the below-mentioned steps to reset your TP-Link range extender by using the range extender's management page:

Step 1: First and foremost, launch a web browser on your computer system and go to the management page of the TP-link range extender.

Step 2: On the management page, go to the “system tools” menu to use the factory default function.

Step 3: After clicking on the “system tool” button, several submenus will open on your screen. You need to search for the “factory default” option from the drop-down menu.

Step 4: On the next screen, you will be asked to tap on the “restore” button to reset the TP-Link extender to its factory default settings.

Step 5: After completing the resetting process, tap on the “restore” button.

These are the simple and easy steps to reset the TP-Link range extender to its factory default settings. Still, if you encounter any issue with the TP Link Extender Reset task then feel free to contact our technical experts.

Simple Instructions To Setup The TP-Link Extender

TP-Link extender is a user-friendly and convenient web interface that allows users to set up an extended network. TP-Link extender covers the maximum area of your house or office, and TP-Link extender boosts the overall strength of the WiFi network. After completing the TP Link Extender Setup process, you can experience the high-speed internet at every corner of your house. You can set up your TP-Link extender either through the manual method or the WPS method. In this blog, we will provide step-by-step instructions to set up the TP-Link extender. Let’s get started.

Quick steps to set up TP-Link extender manually

Check out the following steps to set up the TP-Link extender manually:

Step 1: First of all, connect the TP-Link extender with your computer through an ethernet cable and turn it on.

Step 2: After that, launch any preferred web browser on your computer, enter tplinkextender.net in the search bar and press the enter key.

Step 3: On the TP-Link web page, select the “quick setup” option and tap on the Next button.

Step 4: Then, choose your region and tap on the Next button.

Step 5: After that, your TP-Link extender will scan the wireless network.

Step 6: Now, search for your wireless network and tap on it to select it.

Step 7: Next, enter the password of your wireless network in the given field and proceed with the next step.

Step 8: If you want to create a single and extensive wireless network, then you need to choose the “copy from the main router”, and if you want to create a different network, then select the “customize” option. Then tap on the Next button.

Step 9: In the next window, review your network settings and tap on the finish button to complete the setup of the TP-Link extender.

Quick steps to set up TP-Link extender with WPS button

WPS method is the easiest method to set up the TP-Link extender. You can find this button on the backside of the router. Follow the below-mentioned steps to complete the TP-Link extender setup with the WPS button:

Step 1: To begin with, switch on your TP-Link extender.

Step 2: After that, press the power button on the WiFi router.

Step 3: Then, you need to press and hold the WPS button on the router for 5-6 seconds.

Step 4: Immediately press the WPS button on the TP-Link extender and hold it for 10-15 seconds.

Step 5: Now, the router will start the security authentication and connect to the TP-Link extender.

Step 6: A solid WPS light on the TP-Link extender indicates that the connection is established successfully.

Hopefully, this information will help you to complete the setup of the TP-Link extender. Follow the steps mentioned above carefully and perform the TP Link Extender Setup process. If you encounter any issues with the setup, then feel free to get in touch with our technical experts.

Quick Fix: Setek WiFi Range Extender Not Connecting Issue

Facing issues while using the Setek WiFi range extender? Looking for simple steps to fix the Setek WiFi Range Extender Not Connecting issue? Setek WiFi range extender boosts the network speed and eliminates the WiFi signal dead zones in the house or office and also extends the network coverage area so that you can enjoy seamless internet connectivity. But sometimes, users face technical glitches with the Setek WiFi range extender. Don’t panic. In this blog, you will get to know the simple and easy steps to fix the Setek WiFi range extender connectivity issue. Let’s get started.

How to fix the Setek WiFi range extender is not connecting issue

The setup procedure of the Setek WiFi range extender is straightforward. To enjoy flawless internet connectivity, you need to follow the correct steps to set up the Setek WiFi range extender. Otherwise, you can face a connectivity issue. Following are the proper steps to set up the Setek WiFi range extender:

Step 1: First of all, plug your Setek WiFi range extender and WiFi home router into the power socket and then turn on them.

Step 2: To connect the Setek WiFi range extender to the router via WPS, place the router and extender in the same room.

Step 3: Then, a green light on the Steke WiFi extender will start blinking.

Step 4: Now, press the WPS button on the Steke WiFi extender and hold it for 2 seconds.

Step 5: After this, press the WPS button on the router within 2 seconds after pressing the WPS button on the Setek extender.

Step 6: The LED light will start blinking on the Setek WiFi extender and router.

Step 7: After 10-15 seconds, the Setek WiFi extender will connect to the WiFi home router.

Step 8: A solid green LED light on the Setek extender indicates that the connection is established successfully.

Step 9: Now, you can unplug your Setek WiFi range extender and plug it halfway between the router and the WiFi signal dead zone.

Troubleshooting tips to fix Setek WiFi extender connectivity issue

Following are some other troubleshooting tips to resolve the Setek WiFi extender is not connecting issue.

• Place the Setek WiFi range extender and the WiFi home router in the same room while setting up the extender.
• Place the Setek WiFi range extender away from the other electronic devices like a cordless phone, microwave, Bluetooth device, oven, metal objects, fish tank, etc., to avoid the inference in connectivity.
• Check all the cables that you are using to establish the connection. The wires should not be broken or damaged.
• A solid and reliable internet connection should be there to set up the Setek WiFi range extender.
• If still, you are facing the connectivity issue, try to reset the Setek WiFi range extender and the WiFi home router.

Hopefully, the above steps will help you fix the Setek WiFi Range Extender Not Connecting issue. After successfully connecting with the Setek WiFi range extender, you can enjoy a high-speed internet connection.

How To Complete The Setup Of Linksys RE6300 WiFi Extender

Have you purchased a brand new Linksys RE6300 dual-band WiFi range extender? Looking for the simple steps for Linksys WiFi Extender Setup RE6300? In order to set up Linksys RE6300 WiFi range extender, you need not to modify the settings of the router or you need not to touch your WiFi router at all. You can set up your Linksys RE6300 WiFi range extender either through the WPS button or through the web interface. If you want to know how to set up the Linksys RE6300 WiFi range extender then read the blog till the end and follow the step-step-step guidelines.

Simple steps for the setup of Linksys RE6300 WiFi range extender via WPS button

This is the easiest way to set up a Linksys WiFi range extender. Walkthrough the below-given steps to set up the Linksys RE6300 WiFi range extender:

Step 1: To begin with, connect your Linksys RE6300 WiFi range extender to the power outlet and then turn on the power supply.

Step 2: Now, locate and press the WPS button on the Linksys RE6300 WiFi range extender and wait for the LED light.

Step 3: Then, press and hold the WPS button on the WiFi router within 2 minutes after pressing the WPS button on the Linksys RE6300 WiFi extender.

Step 4: After that, wait for a solid green LED light on the device.

Step 5: Finally, unplug your Linksys RE6300 WiFi range from the power outlet and plug it anywhere in your house.

Simple steps for the setup of Linksys RE6300 WiFi extender manually

Follow the below-mentioned steps to setup Linksys RE6300 WiFi range extender manually:

Step 1: First of all, place your Linksys RE6300 WiFi range extender and WiFi router in the same room and then plug it in the electric outlet.

Step 2: After that, take an ethernet cable and connect your Linksys RE6300 WiFi extender to the home WiFi router.

Step 3: Then, turn on your computer or laptop and connect to the WiFi router through another ethernet cable.

Step 4: Moving forward, open any preferred internet browser on your computer or laptop, enter extender.linksys.com in the address bar and then press the enter key.

Step 5: Thereafter, the Linksys RE6300 login page will appear on your screen, where you need to enter the default login credentials like username and password.

Step 6: After typing the login credentials in the required field, tap on the login button to proceed further.

Step 7: On the next screen, a series of instructions will display that you need to follow in the given order to complete the setup of Linksys RE6300 WiFi range extender.

Step 8: After completing the setup of Linksys RE6300 WiFi range extender, unplug your extender and then place it halfway between the WiFi home router and the WiFi signal dead spot.

So, these are the simple and easy steps to set up Linksys RE6300 WiFi range extender. Follow these steps to complete Linksys WiFi Extender Setup RE6300 and start browsing.

How Do I Complete The Setup Of Belkin WiFi Range Extender Wirelessly

Belkin WiFi range extender repeats the wireless signals from the router and extends the WiFi network in hard-to-reach areas. The Belkin WiFi Extender Setup process is very straightforward. You can set up your Belkin WiFi range extender either through a USB cable or wirelessly. Here, in this blog, you will get to know the simple and easy steps to set up the Belkin WiFi range extender wirelessly. So, read the blog till the end and follow the below-mentioned step-by-step instructions to complete the setup of the Belkin WiFi range extender. Let’s get started.

Quick steps to set up the Belkin WiFi range extender manually

Following are the simple steps to set up the Belkin WiFi range extender manually:

• First of all, plug your Belkin WiFi range extender within the range of the router into the wall socket.
• Then, connect your Belkin WiFi range extender to the computer wirelessly.
• After that, open an internet browser on your computer system and then go to the official website of Belkin by entering belkin.range in the address bar of the internet browser.
• It will redirect you to the Belkin range extender setup page and then click in the box “I accept the end user license agreement” to accept the terms and conditions.
• After clicking on the “Automatic software update” checkbox, all the software updates will be installed automatically.
• Then, select the “manual setup” option from the bottom of the setup pager. 
• Now, the system will scan the wireless network in range and display a list of all available networks on your screen. Then, you need to select the wireless network from the list that you want to extend from the Belkin extender. 
• If you cannot locate the network name in the list then you need to click on the refresh button to scan it again.
• After selecting the network name, enter the password for your WiFi network in the given field and then tap on the next button.
• Then, spot finder technology will check a better location for your Belkin WiFi range extender for its better performance.
• If you don’t want to change the location of your Belkin WiFi range extender then click on the “connect anyway” button and proceed with the next step.
• Now, you need to create an administrator password for your Belkin WiFi range extender. In order to create the password, click on create an admin password, option then type the admin password again and then add a password hint. Finally, click on the save button to save the password.
• In the next window, review the extended network information. If you want to make any changes then you need to tap on the edit button. Otherwise, you can proceed with the next step by clicking on the next button.
• After that, enter your password in the login window to see the changes.

Hopefully, the above-mentioned steps will help you with the setup of the Belkin WiFi range extender. Still, if you are facing any issues with Belkin WiFi Extender Setup then feel free to contact our technical experts.

Linksys RE6300 Extender Setup Process To Boost WiFi

The best solution to resolve the weak WiFi signal strength issues at home or office is Linksys WiFi range extender. Linksys RE6300 WiFi range extenders are not only easy to set up but also easy to maintain. If you are looking to perform the Linksys WiFi Extender Setup RE6300 process then you have landed in the right spot. If you don’t have the installation CD, don’t worry, still you can set up your Linksys RE6300 WiFi range extender. Here, in this blog, you will get to know each and every simple step to set up Linksys RE6300 WiFi range extender. 

Prerequisite to set up the Linksys RE6300 WiFi range extender

Following are the necessary things that you should keep in mind while setting up the Linksys RE6300 WiFi range extender:

• Your Linksys RE6300 WiFi range extender must be turned on.
• Please note down the SSID or network name and wireless password or network key of your existing WiFi router.
•  You must have a reliable and working internet connection.

After fulfilling the above requirements, you can proceed with the setup process of the Linksys RE6300 WiFi range extender. You can set up your Linksys WiFi range extender either through manual method or WPS methods. Let’s discuss both methods.

Instructions to set up Linksys RE6300 WiFi range extender through manual method

In order to set up the Linksys RE6300 WiFi range extender through the manual method, the steps are given below:

• To begin with, keep the home router and Linksys RE6300 WiFi range extender in the same room.
• Now, take an ethernet cable to connect your Linksys WiFi range extender to the computer system.
• After that, plug your Linksys WiFi range extender and computer system into the power outlet.
• Then, connect your computer to the Linksys extender setup-XXX network.
• Next, open an internet browser on your computer and go to the official website of Linksys extender.
• Thereafter, you will be redirected to the login page of Linksys extender, where you need to enter the login credential and then click on the login tab.
• When the basic extender setup window displays on your screen, enter the network name or SSID and password in the given field.
• Now, click on the manual option and then switch off the Linksys WiFi range extender for some time. Finally, turn on your Linksys RE6300 WiFi range extender properly.

Instructions to set up Linksys RE6300 WiFi range extender through WPS method

The WPS method is very helpful in establishing a steady connection between the Linksys WiFi range extender and wireless device. Follow the below-mentioned instructions to set up the Linksys RE6300 WiFi range extender through the WPS method:

• First of all, insert the Linksys RE6300 WiFi range extender into the power outlet.
• After that, press and hold the WPS button on the Linksys RE6300 WiFi range extender and wait for a WPS LED light on the device.
• The power LED light on the extender indicates that your range extender is configured with the router.
• A solid green LED light on the Linksys WiFi range extender indicates that the setup of Linksys WiFi range extender is successfully completed.

Congratulations! You have successfully completed the Linksys WiFi Extender Setup RE6300 process. Now, you can connect your WiFi-enabled device to the Linksys RE6300 WiFi range extender and enjoy flawless browsing.

Quick Steps For Linksys WiFi Extender RE6300 Setup

Linksys RE6300 WiFi range extender is an ultimate device that boosts the existing WiFi signals up to 7500 square feet. Linksys RE6300 WiFi range extender is compatible with almost every standard WiFi router. You just need to change the settings of your main WiFi router while performing the Linksys WiFi Extender RE6300 Setup. If you are a new user of Linksys router and want to know how to set up Linksys RE6300 WiFi router then read the blog till the end and follow the below-mentioned steps. Complete the setup of your Linksys RE6300 WiFi range extender and enjoy seamless streaming and flawless online gaming. 

Steps for Linksys RE6300 WiFi range extender setup through ethernet cable

If you want to set up your Linksys RE6300 WiFi range extender through an ethernet cable then follow the below-mentioned steps carefully and don’t skip any step.

Step 1: In the first step, plug your Linksys RE6300 WiFi range extender into the wall socket near the main router.

Step 2: Now, grab an ethernet cable, connect one end of the cable to the Linksys RE6300 extender and the other to the WiFi router.

Step 3: Then, take another ethernet cable and connect the computer or laptop to the WiFi router.

Step 4: Next, run any preferred web browser on your computer and go to the Linksys extender web page.

Step 5: On the web page, enter the default login username and password and click on the login button.

Step 6: After that, move to the Linksys RE6300 extender admin panel and click on the “extender” option.

Step 7: Now, click on the next button and follow all the on-screen instructions carefully to complete the setup of Linksys RE6300 extender.

Step 8: Then, customise the Linksys RE6300 WiFi range extender’s settings as per your requirements and click on the apply button to save the settings.

Step 9: Finally, unplug your Linksys RE6300 WiFi range extender and plug it in the new location.

Steps for Linksys RE6300 WiFi range extender setup through the WPS

WPS method is the easiest method to set up a Linksys WiFi range extender. Follow the below steps to set up the Linksys RE6300 WiFi range extender through the WPS button method:

Step 1: First of all, plug your Linksys RE6300 WiFi range extender into the power socket near the home router.

Step 2: Wait for a few seconds until you see a green LED light on both devices.

Step 3: Now, press the WPS button on Linksys RE6300 WiFi range extender and hold for 2 seconds.

Step 3: After that, press the WPS button on the router within 2 seconds after pressing the WPS button on the Linksys WiFi extender.

Step 4: Finally, unplug the Linksys RE6300 WiFi range extender and plug it in a new location.

Step 5: Wait for a green LED light and then connect your desktop or laptop to the extended network to browse your favorite website.

Congratulations! You have successfully completed setup the Linksys RE6300 WiFi range extender. Complete the Linksys WiFi Extender RE6300 Setup and enjoy seamless streaming.

How To Fix Setek WiFi Range Extender Not Connecting Issue

Struggling with the setup of Setek WiFi range extender? Want to know how to fix the Setek WiFi Range Extender Not Connecting issue? Setek WiFi range extender is an amazing device to extend the WiFi network in the area to eliminate the dead spots. Setek WiFi range extender covers the longer distance so that you can enjoy the uninterrupted internet connection all-around your home or office. But sometimes you can face connectivity issues with your Setek WiFi range extender. Don’t worry. In this blog, you will get to know the simple and easy steps to fix connectivity issues of Setek WiFi range extender.

Steps to fix Setek WiFi range extender not connecting issue

In order to enjoy better connectivity, you need to follow the correct steps to set up the Setek WiFi range extender. Following are the correct steps to set up the Setek WiFi range extender:

Step 1: First of all, plug your Setek WiFi range extender and the router into the electrical outlet.

Step 2: If you want to set up the Setek WiFi range extender through the WPS button then place the extender near the router.

Step 3: After that, wait for a green LED light on the Setek WiFi extender.

Step 4: Now, press the WPS button on the Setek WiFi extender for 2 seconds and then press the WPS button on the home router for 2 seconds.

Step 5: Then, the LED lights will start blinking on the Setek extender and the router.

Step 6: Now, wait for 10-15 seconds until the Setek extender connects to the router.

Step 7: A solid green LED light on the Setek WiFi range extender indicates that the extender is connected to the router.

Step 8: Now, you can unplug the Setek WiFi range extender and spot it in a new location where you need a web.

Reset the Setek WiFi range extender

Still, if you are facing connectivity issues then try to reset your Setek WiFi range extender. Resetting the Setek WiFi extender will erase all the data and resolve any issues. Resetting the Setek WiFi range extender process is very easy. You just need to follow the below-mentioned steps to reset the Setek WiFi range extender:

Step 1: First and foremost, press and hold the reset button for about 10 seconds and wait for a red LED light.

Step 2: Now, wait for 30 seconds and enter the default IP address 192.168.50.

Step 3: Then, on the right-hand side of the computer screen, click on the management tab.

Step 4: After that, you will see the factory reset button, you need to click on it.

Step 5: Next, a confirmation pop-up will appear on your screen, click on the ok button and complete the resetting process.

These are the simple steps to fix the connectivity issues of Setek WiFi range extender. Hopefully, by following these steps you can easily fix the Setek WiFi Range Extender Not Connecting issue.

Learn The Easiest Way For Belkin WiFi Extender Setup

Facing issues with Belkin WiFi Extender Setup? Want to know how to set up a Belkin WiFi range extender? Well, in this blog, you will get to know the easiest way to set up the Belkin WiFi range extender. You can set up the Belkin WiFi range extender through an installation CD. But if you lost the installation CD then you need not to worry about it. You can set up your Belkin WiFi range extender through the web browser method. Let’s understand the process of the setup of the Belkin WiFi range extender.

Simple steps to set up Belkin WiFi range extender

Go through the below-mentioned steps to set up the Belkin WiFi range extender:

• First and foremost, plug your Belkin WiFi range extender into the wall socket and then turn it on.
• Now, establish a wireless or wired connection between the Belkin WiFi range extender and computer. If you want to establish a wired connection then take a USB cable and attach its one end into the USB port of the Belkin WiFi range extender and another end into the USB port of the computer. If you want to set up a wireless connection then select belkin.setup option.
• After establishing the connection, open a web browser on your computer system and go to the official website of Belkin. 
• Now, a web-based Belkin setup window will open on your screen, you need to click on the start button from the primary screen.
• Then, a wireless network list will display on your screen, you need to select the preferred network that you want to boost up, enter a password and click on the next button.
• Thereafter, the extended network SSID and password will appear on your screen. Check the details and tap on the create button to move forward. If you want to make changes in the settings then click on the edit button.
• With this, the process to set up the Belkin WiFi range extender will be completed. You will get a confirmation message regarding the same.

Simple steps to set up Belkin WiFi range extender through WPS method

Follow the below-mentioned steps to setup Belkin WiFi range extender through the WPS method:

• First of all, plug your Belkin WiFi range extender into the wall socket near to the WiFi router.
• Now, locate the WPS button on the router and Belkin WiFi range extender and make sure that both devices are turned on.
• Then, press and hold the WPS button on the router and wait for the LED lights on the router.
• After that, press and hold the WPS button on the Belkin WiFi range extender within 2 minutes.
• Next, allow the router and Belkin WiFi range extender to join the network and sync all the settings.
• Once your Belkin extender is connected to the router, the WPS light will turn solid. After that, you can adjust the settings of your Belkin WiFi range extender.

Hopefully, by following the above-mentioned steps you can easily complete the Belkin WiFi Extender Setup process.

Learn The Easiest Steps To Perform The Linksys WiFi Extender RE6300 Setup

With the advancement of technology, it is necessary to enhance the coverage and strength of the home network. Linksys RE6300 WiFi range extender is the ultimate solution that helps in providing better internet connectivity and eliminates the WiFi signals dead zone at home and offices. If you have purchased a brand new Linksys RE6300 extender and want to know how to set it up then you are in the right place. In this blog, we provided the complete information about Linksys WiFi Extender RE6300 Setup. You can set up your Linksys RE6300 WiFi range extender either through an Ethernet cable or WPS button.

Quick steps to setup Linksys RE6300 WiFi range extender through ethernet cable

If you are new to extender technology, then walk through the below-mentioned steps to setup the Linksys RE6300 WiFi range extender:

• To begin with, plug your Linksys RE6300 WiFi range extender into the power socket near the main WiFi router.
• Then, connect your Linksys RE6300 extender to the main router through an ethernet cable.
• Now, connect your WiFi router to the computer or laptop through another ethernet cable.
• After that, run any preferred internet browser on your computer or laptop and go to the official website of Linksys.
• Further, on the login page, enter the user ID and password in the required field and click on the login button.
• Thereafter, you will navigate to the Linksys extender admin panel where you need to select the extender mode and then tap on the next button.
• Next, continue with the on-screen instructions and customize the Linksys extender settings as per your requirements.
• Once you are done with the setup of Linksys RE6300 WiFi range extender, hit on the apply button to save all the changes that you made.
• Now, you can unplug your Linksys RE6300 WiFi range extender and plug it on the dead zones to extend the signal strength.
• Finally, connect your computer or laptop to the extended wireless network in order to test the internet connection.  

Quick steps to setup Linksys RE6300 WiFi range extender through WPS

If you feel that the above steps are tricky then you can set up your Linksys RE6300 extender through the WPS button. The WPS button setup method is very easy to set up the Linksys extender. 

• First of all, plug your Linksys RE6300 WiFi range extender near the main router.
• Now, wait for the green LED light on both devices. 
• Then, locate and press the WPS button on your Linksys RE6300 extender for 2 minutes.
• Now, press the WPS button on the main router within 2 minutes.
• Then, unplug your Linksys RE6300 WiFi range extender and plug it in a new location and wait for a solid green LED light.
• Connect your computer or laptop to the extender network and visit your favorite website to rest the internet connection. 

Congratulations! You have successfully completed the Linksys WiFi Extender RE6300 Setup process. Now, you can enjoy online surfing, gaming, and many more with your extended network.