How To Perform TP Link WiFi Extender Setup? Here Is The Solution

Are you annoyed with the slow internet connection? In that case, you need to use the TP-Link WiFi range extender. TP-Link WiFi range extender boosts the WiFi signal strength and provides you with a high-speed internet connection at every corner of your home and office. You can set up your TP-Link extender manually, through the WPS button or the Tether app. If you don’t know how to perform the TP Link WiFi Extender Setup, then don’t fret. In this blog, we are going to discuss the simple and most manageable steps to set up the TP-Link WiFi range extender. Let’s get started.

Methods to setup the TP-Link WiFi range extender 

There are three methods to set up the tp-Link WiFi range extender:

• Through a web browser.
• WPS button.
• Tether app.

Method 1: Through a web browser

Following are the steps to set up the TP-link WiFi range extender through the web browser method:

• First and foremost, connect your TP-Link extender to the power source and turn it on.
• Now, grab an ethernet cable and connect the TP-Link extender to the computer system.
• Next, launch any compatible web browser on your computer and go to the official website of TP-Link extender by typing tplinkrepeater.com in the URL bar.
• After that, a TP-Link web page will display on your screen, choose the “quick setup” option and tap on the “Next” button to proceed further.
• Then, choose your region and tap on the “Next” button.
• Now, your TP-Link extender will scan for the wireless network and display a list of all available networks.
• You need to choose your wireless network and tap on the “Next” button.
• In the next step, enter your WiFi password.
• If you want a single network, then tap on “copy from the router”, and if you're going to create a different network, then you need to select the “customize” option.
• After that, tap on the “Next” button and review the network settings.
• Finally, tap on the “finish” button to complete the TP-Link extender setup procedure.

Method 2: Through the WPS button

If your WiFi home router supports the WPS button, then setting up the WiFi extender through the WPS button is the easiest way. Follow the steps below to set up the TP-Link WiFi range extender through the WPS button:

• To begin with, place your TP-Link extender near the WiFi home router and then turn it on.
• Now, locate the WPS button on the router and press it.
• Hold the WPS button for 5-6 seconds until you see a flashing LED light on the router.
• Next, move to the TP-Link extender and press the WPS button for 10-15 seconds.
• After that, use the default username and password to connect the extender network.

Method 3: Through the Tether app

You can manage the device settings by using the Tether app. Follow the below-mentioned steps to set up the TP-Link WiFi range extender through the Tether app:

• First of all, plug your TP-Link WiFi range extender into the wall socket near the WiFi router.
• Next, download and install the Tether application on your device from the Google play store or Apple app store.
• Now, enter your details to log in to the Tether app and then scan the QR code.
• Finally, continue with the on-screen instructions to complete the setup of the TP-Link WiFi range extender.

These are the simple steps to set up the TP-Link WiFi range extender. Follow these steps to perform the TP Link WiFi Extender Setup, and enjoy uninterrupted browsing at every corner of your house.

Know The Methods For TP Link Wifi Extender Setup

TP Link wifi extender efficiently covers the previously network unreachable zones. It mainly works for spreading the network coverage and boosting the signal strength. After setting up the TP Link range extender, you need to log in to the extender’s configuration settings by navigating to the official web portal of the wifi  extender, i.e., tplinkrepeater.net. However, in this blog we will focus on two main methods of TP Link wifi  extender setup namely, WPS method and browser method. Read the blog to set up your TP Link like a pro.

WPS Method For TP Link Wifi  extender Setup - 

When your wifi router and  extender both support the WPS button, then the TP Link  extender setup can be quickly performed. Follow the steps mentioned below to know how TP Link  extender setup is done using the WPS method:-

• Step 1: Search for the WPS button on your wifi router and  extender.
• Step 2: Then place your extender near the wifi router to connect the devices easily.
• Step 3: Now, push the WPS button on the TP Link wifi extender and the wifi router.
• Step 4: After that, you will see the LED bulbs on the extender and wifi router start blinking.
• Step 5: Wait patiently as it might take a few minutes.
• Step 6: Once the LED lights are stable, this will indicate that the connection is complete and you can link your computer system or mobile phone to the wifi extender’s extended network connection.

Browser Method For TP Link Wifi  Extender Setup - 

In case any of your one device doesn't support the WPS button then, you don’t need to worry. You can do the extender setup manually with the help of a browser. So follow the instructions closely to finish the setup manually;

1. Step 1: Initiate by unpacking and unboxing the TP Link wifi extender.
2. Step 2: Get rid of all the packaging material.
3. Step 3: Now disconnect the modem, router, and PC device.
4. Step 4: The next step is to associate the wifi router and internet modem using  an ethernet wire.
5. Step 5: Now you must link the computer system to the wifi router, modem, and the TP Link wifi extender.
6. Step 6: The next step is to open the preferred browser, it could be any, Google chrome, firefox, or opera, etc.
7. Step 7: In the web address bar, type www.tplinkrepeater.net or tplinkrepeater.net to access the wifi extender’s admin panel.
8. Step 8: Enter ‘admin’ in lower case in the username and password fields.

Final Verdict On TP Link Wifi  extender Setup!

Once you complete the TP Link wifi Extender Setup using the web browser method or WPS method, you need to log in to the admin settings of the extender to check the network status or make changes to the existing settings of the extender. You can change the login information as well. Make sure you log in via tplinkrepeater.net. This is the official web address for the extender setup. When you enter the web address tplinkrepeater.net you will be redirected to the TP Link extender’s admin interface as soon as you enter the login credentials of your extender. That’s it! The  extender setup is complete and you can now enjoy accessing high-speed internet.

How To Recover The Linksys WiFi Extender Setup RE6300 Password

Different WiFi extenders have different default usernames and passwords. Nobody wants to edit network things such as SSID and WiFi passwords. But changing the extender’s password is highly recommended for security purposes. Sometimes users forget their Linksys WiFi Extender Setup RE6300 username and password and find it difficult to access the login page. In that situation, you need to reset your Linksys WiFi range extender to factory default settings. But before resetting the extender, we can use other methods to recover the Linksys WiFi extender password and username. Let’s discuss the simple steps to recover the password and username.

Different ways to recover the Linksys WiFi range extender username and password

You can find the default username and password for Linksys WiFi range extender online by checking the default settings, guessing the default login details, or through a password cracker. Let’s understand the procedure.

• Check the username and password online

If you are sure that you haven’t changed the password, finding the Linksys WiFi extender setup username and password through a search engine is easy. You can use any preferred search engine, but you should know the manufacturer or ISP or your device’s model number.

• Check the Linksys WiFi range extender for default username and password

To access your Linksys WiFi range extender, look at the bottom of the extender or either side of the extender to get the default credentials. Almost all WiFi range extenders have their default username and password labeled on them. Or you can refer to the user manual to get the Linksys WiFi range extender's default login details.

• Enter the different passwords to get Linksys WiFi extender setup password

If you can't find the default credentials label on your Linksys WiFi range extender, then use a different username and password. Following are a few usernames and passwords that you can try:

1. Try to use admin as username and password.
2. Enter admin as username and password in the password field.
3. Type 1234 in the username and password field.
4. Enter admin in the username field and leave the password box blank.
5. Leave the username field blank and type admin in the password field.
6. Enter root in the username and password field.
7. Type root in the username field and password in the password field.

• Use password cracker to get the Linksys WiFi range extender setup password

In this method, the password cracker tries to recover the forgotten password through a dictionary attack, which means the software comes with an extender password list that contains around 3000 passwords that are related to the extender. You need to enter the IP address to get the Linksys WiFi range extender password. Please note that you should know the default login username and password. This method is much faster as compared to entering the password physically.

Hopefully, these methods will help you to recover the Linksys WiFi range extender password without any difficulty. Still, if you are facing any issues with getting the Linksys WiFi Extender Setup RE6300 username and password, then feel free to contact our experts.

Simple And Easy Steps To Reset TP-Link Extender

If you are using your TP-Link extender for a long time, then you can encounter problems with your extender, such as a significant drop in connection speed, WiFi network is not accessible, and so on. In these situations, you might think about resetting your TP-Link extender, but you don’t know how to perform the TP Link Extender Reset process. Don’t worry. This blog will assist you with resetting the TP-Link extender. In this blog, you will learn the easy steps to reset your TP-Link extender through your device, phone, and computer. Let’s get started.

Different ways to reset the TP-Link extender

There are three different ways to reset the TP-Link extender:

• Through the drive.
• From mobile phones or tablets.
• From the computer.

Method 1: Through the device

If you want to reset your TP-Link extender through the device, then the steps are given below:

Step 1: First of all, find the reset button on your TP-Link extender and press it with a sharp pin or paperclip for 1-2 seconds.

Step 2: Once the TP-Link range extender reboot, release the button.

Step 3: Now, you can reconfigure your TP-Link range extender by following the default settings. You can find the default settings under the bottom label of the device.

Method 2: From mobile phones or tablets

To reset the TP-Link range extender through mobile or tablet, you need to download the Tether app on your device. Follow the below steps to reset the TP-Link range extender from phone or tablet:

Step 1: First of all, launch the Tether app on your device and go to the “my device” tab.

Step 2: Now, select your extender and go to the administration panel.

Step 3: Then, select the “tools” option from the drop-down menu and tap on the “system” button.

Step 4: Next, double-tap the “factory default” button and wait for 30 seconds to complete the resetting of the TP-Link extender.

Method 3: From the computer

If you want to reset your TP-Link extender through your computer, then you need to launch the web browser on your system. Go through the following steps to reset the TP-Link extender through the computer:

Step 1: First of all, open the web browser on your system and go to the admin panel of your extender.

Step 2: On the next screen, enter your username and password in the respective field and tap on the login button.

Step 3: Then, select the “system tool” option from the left sidebar and select the “backup and restore” option from the drop-down menu.

Step 4: After that, hit the “restore factory setting” button and tap on the yes button to confirm.

If you want to restore by using the backup, then follow the below steps:

Step 1: First of all, select the “restore” option and then tap the “browse by” button.

Step 2: After that, select the backup file and hit the restore button.

Step 3: Finally, click the yes button to give confirmation.

These are the simple steps to reset the TP-Link extender. Still, if you are facing any issues with the  TP Link Extender Reset process, then get in touch with our technical experts.

Learn The Easiest Way To Reset TP Link Extender

Due to the advancement of technology, the internet has become the top-most choice of people. TP-Link has gained more popularity in a few years. But sometimes users encounter problems with TP-Link extenders like they have forgotten the username and password. Some problems with TP-Link extenders cannot be sorted because you don’t know the exact cause of the problem. In such situations, you need to reset the Tp-Link range extender. The TP Link Extender Reset task is very simple and easy. Resetting the TP-Link extender to its factory default settings will help you to make a fresh start.

Methods to reset the TP-Link extender

There are two methods to reset the TP-Link extender: one is a hard reset of the TP-Link extender and another is by using the extender’s management page.

Method 1: Hard reset of the TP-Link range extender

To hard reset the TP-Link range extender to its factory default settings, use the WPS/reset button. You can find the reset button at the front or backside or side panel of the TP-Link range extender. Follow the below-mentioned steps to hard reset the TP-Link WiFi range extender:

Step 1: First of all, press the WPS or reset button on the TP-Link extender and hold it for 8 seconds.

Step 2: Once you see a slow flashing LED light, release the button and wait until the extender reset to its factory default settings.

Once you are done with the reset of the TP-Link extender, now you need to configure your extender. You can find all the default settings under the bottom label of your TP-Link range extender. If you backed up the configuration file then you can use it to configure the extender.

Method 2: Reset the TP-Link range extender by using the range extender's management page

If pressing the WPS button is not working then you can use the TP-Link extender management page to reset the extender without causing any hardware or software damage. Go through the below-mentioned steps to reset your TP-Link range extender by using the range extender's management page:

Step 1: First and foremost, launch a web browser on your computer system and go to the management page of the TP-link range extender.

Step 2: On the management page, go to the “system tools” menu to use the factory default function.

Step 3: After clicking on the “system tool” button, several submenus will open on your screen. You need to search for the “factory default” option from the drop-down menu.

Step 4: On the next screen, you will be asked to tap on the “restore” button to reset the TP-Link extender to its factory default settings.

Step 5: After completing the resetting process, tap on the “restore” button.

These are the simple and easy steps to reset the TP-Link range extender to its factory default settings. Still, if you encounter any issue with the TP Link Extender Reset task then feel free to contact our technical experts.

Simple Instructions To Setup The TP-Link Extender

TP-Link extender is a user-friendly and convenient web interface that allows users to set up an extended network. TP-Link extender covers the maximum area of your house or office, and TP-Link extender boosts the overall strength of the WiFi network. After completing the TP Link Extender Setup process, you can experience the high-speed internet at every corner of your house. You can set up your TP-Link extender either through the manual method or the WPS method. In this blog, we will provide step-by-step instructions to set up the TP-Link extender. Let’s get started.

Quick steps to set up TP-Link extender manually

Check out the following steps to set up the TP-Link extender manually:

Step 1: First of all, connect the TP-Link extender with your computer through an ethernet cable and turn it on.

Step 2: After that, launch any preferred web browser on your computer, enter tplinkextender.net in the search bar and press the enter key.

Step 3: On the TP-Link web page, select the “quick setup” option and tap on the Next button.

Step 4: Then, choose your region and tap on the Next button.

Step 5: After that, your TP-Link extender will scan the wireless network.

Step 6: Now, search for your wireless network and tap on it to select it.

Step 7: Next, enter the password of your wireless network in the given field and proceed with the next step.

Step 8: If you want to create a single and extensive wireless network, then you need to choose the “copy from the main router”, and if you want to create a different network, then select the “customize” option. Then tap on the Next button.

Step 9: In the next window, review your network settings and tap on the finish button to complete the setup of the TP-Link extender.

Quick steps to set up TP-Link extender with WPS button

WPS method is the easiest method to set up the TP-Link extender. You can find this button on the backside of the router. Follow the below-mentioned steps to complete the TP-Link extender setup with the WPS button:

Step 1: To begin with, switch on your TP-Link extender.

Step 2: After that, press the power button on the WiFi router.

Step 3: Then, you need to press and hold the WPS button on the router for 5-6 seconds.

Step 4: Immediately press the WPS button on the TP-Link extender and hold it for 10-15 seconds.

Step 5: Now, the router will start the security authentication and connect to the TP-Link extender.

Step 6: A solid WPS light on the TP-Link extender indicates that the connection is established successfully.

Hopefully, this information will help you to complete the setup of the TP-Link extender. Follow the steps mentioned above carefully and perform the TP Link Extender Setup process. If you encounter any issues with the setup, then feel free to get in touch with our technical experts.

Quick Fix: Setek WiFi Range Extender Not Connecting Issue

Facing issues while using the Setek WiFi range extender? Looking for simple steps to fix the Setek WiFi Range Extender Not Connecting issue? Setek WiFi range extender boosts the network speed and eliminates the WiFi signal dead zones in the house or office and also extends the network coverage area so that you can enjoy seamless internet connectivity. But sometimes, users face technical glitches with the Setek WiFi range extender. Don’t panic. In this blog, you will get to know the simple and easy steps to fix the Setek WiFi range extender connectivity issue. Let’s get started.

How to fix the Setek WiFi range extender is not connecting issue

The setup procedure of the Setek WiFi range extender is straightforward. To enjoy flawless internet connectivity, you need to follow the correct steps to set up the Setek WiFi range extender. Otherwise, you can face a connectivity issue. Following are the proper steps to set up the Setek WiFi range extender:

Step 1: First of all, plug your Setek WiFi range extender and WiFi home router into the power socket and then turn on them.

Step 2: To connect the Setek WiFi range extender to the router via WPS, place the router and extender in the same room.

Step 3: Then, a green light on the Steke WiFi extender will start blinking.

Step 4: Now, press the WPS button on the Steke WiFi extender and hold it for 2 seconds.

Step 5: After this, press the WPS button on the router within 2 seconds after pressing the WPS button on the Setek extender.

Step 6: The LED light will start blinking on the Setek WiFi extender and router.

Step 7: After 10-15 seconds, the Setek WiFi extender will connect to the WiFi home router.

Step 8: A solid green LED light on the Setek extender indicates that the connection is established successfully.

Step 9: Now, you can unplug your Setek WiFi range extender and plug it halfway between the router and the WiFi signal dead zone.

Troubleshooting tips to fix Setek WiFi extender connectivity issue

Following are some other troubleshooting tips to resolve the Setek WiFi extender is not connecting issue.

• Place the Setek WiFi range extender and the WiFi home router in the same room while setting up the extender.
• Place the Setek WiFi range extender away from the other electronic devices like a cordless phone, microwave, Bluetooth device, oven, metal objects, fish tank, etc., to avoid the inference in connectivity.
• Check all the cables that you are using to establish the connection. The wires should not be broken or damaged.
• A solid and reliable internet connection should be there to set up the Setek WiFi range extender.
• If still, you are facing the connectivity issue, try to reset the Setek WiFi range extender and the WiFi home router.

Hopefully, the above steps will help you fix the Setek WiFi Range Extender Not Connecting issue. After successfully connecting with the Setek WiFi range extender, you can enjoy a high-speed internet connection.